Operation Manual

20
Under advance seings menu, press ‘ < ’ or ‘ > ’ buon to select ‘Scan seing’, and then press ‘Select/Menu’
buon to confirm.
Press ‘ < ’ or ‘ > ’ buon to select ‘All stations‘ (default) or ‚Strong stations only’, and then press ‘Select/Menu’
buon to confirm seing.
16.2.2 Audio seing
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor quality audio.
The audio quality can be improved using mono.
Under advance seings menu, press ‘ < ’ or ‘ > ’ buon to select ‘Audio seing’, and then press ‘Select/Menu’
buon to confirm.
Press ‘ < ’ or ‘ > ’ buon to select ‘Stereo allowed’(default) or ‘Forced mono’, and then press ‘Select/Menu’
buon to confirm seing.
16.2.3 System
Please refer to 16.1.5.
17 Troubleshooting
Problem: No Power.
Solution: Ensure the power adapter is properly connected.
Make sure that the radio is turned on.
Problem: The unit does not respond when pressing any buons.
Solution: The unit may become unresponsive during use. Switch the unit o and then on again to reset it.
Problem: Poor radio reception.