MultyFocus Operating Instructions

5.9 External Programmation
You can copy programmation changes to a second receiver.
The data transfer between both receivers requires an authentic
SCART cord (21 pins).
> Connect the SCART 3 output of receiver 1 with the SCART 3 input
of receiver 2.
On both receivers:
> display the installation menu (see p. 8).
> press to set pointer to „ext. programmation“
> press .
On target receiver to be re-programmed:
> press to set pointer to „Ziel“ (target)
> press to begin.
On source receiver to copy programmation from:
> press to set pointer to „Quelle“ (source)
> press to begin.
During the data transfer the screen displays a number between 1
and 127.
On the receiver with the new programmation data:
> press on the receiver.
On both receivers:
> press to return tothe installation menu.
OK
OK
OK
16
STOP
*M-Focus 2.6.95 14.12.1999 10:36 Uhr Seite 16