Quick Start Guide

23
FRETSLROLVLTPTRU EN
DE
0904/4110_0111
You need administrator rights to install the software packages for your products.
Check the “User Accounts” to ensure that you have administrator rights.
You can either manually install the device drivers rst and then the software or let the drivers
be set up automatically by the software installation process. For less experienced users we
recommend installing the drivers automatically via the software installation process.
For DVB-PC TV Stars that are Compatible with Windows 7
®
, the operating system searches
online for the correct device driver so it is important to ensure that there is a broadband
connection. The drivers are then installed automatically and driver updates are received via
Automatic Updates.
If a problem occurs with this process, please refer to the FAQ (frequently asked questions) section
on our website.
5. Updating the driver
If you have installed several TechniSat PCI, PCI Express or USB devices, you will need to update
the drivers for each device separately.
If you have installed the Server4PC data reception application, you will need to close it after
starting the system before you update your software. The Server4PC program icon is located in
the Windows task bar.
Now start the software installation. The Software Installation wizard automatically updates the
drivers for all installed devices and the software package.
The software installation routine will now execute the next step.
6. Linux
TechniSat supports the eorts of the Linux Developer Community and the majority of our
products are supported within the Linux Video-4 framework (www.linuxtv.org).
Please note that TechniSat cannot oer any support or warranty for this software and that
you use it at your own risk.
Figure 11: Server4PC on the system display