Installation Guide

®
Installation Instructions For:
BarkBinder®
5660 Westside Road, Redding, CA 96001 USA Ph: 877-356-2250 Fax: [phone]
www.TechniSoil.com E-mail: [e-mail]
I. Features & Benefits
BarkBinder® preserves the appearance of brous, shredded
mulch products and pine straw while preventing wind and water
erosion in landscaped areas. BarkBinder® concentrate dilutes
with water, providing for an easy spray-on application process
that is completely safe for plants, animals, and the environment.
Maintaining a beautiful landscape is easy with this cost effective
solution for mulch products.
• Extends natural landscape aesthetic
• Reduces wind and water erosion
• Easy to apply
• Minimizes landscape maintenance time
• Eco-friendly, water-based, VOC-free formula
• Inhibits weed growth
II. Tool Recommendations
• Pressurized sprayer (25 - 40 PSI)
III. Material Selection Recommendations:
BarkBinder® is best suited for use on mulch or bark with
small (¼”) to medium (2”) shredded substrates such as:
• Fibrous, Shredded Mulch or Bark
• Ground Cover Mulch
• Pine Straw
Do not use BarkBinder® with the following:
• Chunk bark nuggets
• Wood chips
• Synthetic bark
IV. Dilution Ratio & Coverage
For optimal results, mix BarkBinder® concentrate at a 4 : 1
ratio with water.
• Example: 1 gallon of BarkBinder® mixed with 4
gallons of water will yield 5 gallons of diluted solution
for recommended application scenarios.
BarkBinder® diluted solution is easliy applied using a standard
1 - 5 gallon capacity low-pressure, pump sprayer.
• For larger applications, electric, high-capacity spray-
ers may be used.
Apply BarkBinder® diluted solution at a rate of 25ft
2
/gallon
TYPICAL USES:COVERAGE up to:
12 5 F t
2
Per Gallon Concentrate
(See coverage rates in Section IV)
Install guidelines and application rates may vary. If product
does not match bottle image at left, please contact
manufacturer technical support at 877-356-2250.
• Fibrous, Shredded Bark
• Ground Cover Mulch
• Pine Straw