Use and Care Manual

Joint Material & Coverage Guidelines:
NanoPave JSS covers up to 100 ft
2
/gal. Coverage rate is dependent on paver
or stone porosity, joint width, depth and the type of jointing material used.
NOTE: Avoid jointing materials that contain clay, dirt, or materials that lack structural integrity.
Screened aggregates that may improve permeability will not stabilize well.
*
For joints ranging
from 3/4” up to 4”, use
a decomposed granite
(DG) material, preferably
with a gradation range of
either 1/4” minus or 3/8”
minus.
• Advanced Formula JSS for hardscape walkways &
patios.
• Color enhancing sealant commonly used on
pavers,agstone&bricks.
• Ideal for walkways, patios, pool decks, and other
foottracareas.
• Formulated to penetrate and stabilize paver sand
joints up to 3/4" wide and decomposed granite
(DG) joints from 3/4” to 4” wide.
• Coverage rates up to 100 ft
2
/gallon depending on
surface porosity and joint width.
• Water-based, VOC-free, non-hazardous, and safe
to apply around landscaping.
• Simple 2-step application when combined
hardscape surface and ambient temperatures are
within a 40º - 90º F range.
• Available in two breathable sheens:
Natural Look
Enhanced Finish
Product videos and install
guide available online at
TechniSoil.com
Joint
Width:
Recommended
Joint Material:
JSS
Coverage:
⅛”-¼”
Paver Joint Sand
90 - 100 ft
2
/gal
¼”-½”
75 - 90 ft
2
/gal
½”-¾”
60 - 75 ft
2
/gal
*¾”-2”
Decomposed Granite (DG)
45 - 60 ft
2
/gal
* 2”-4”
30 - 45 ft
2
/gal