Installation Guide

®
Installation Instructions For:
Ultramix® Designer Series Paver Joint Sand
5660 Westside Road, Redding, CA 96001 USA Ph: 877-356-2250 Fax: [phone]
www.TechniSoil.com E-mail: [e-mail]
I. Features & Benefits
UltraMix® Designer Series Paver Joint Sand is a
premium blend of vivid colored sand for use with paver,
flagstone, brick, and natural stone joints up to 1” wide.
The UltraMix® dust-free formulation provides superior
structural strength during installation and prevents
hazing issues when stabilized with NanoPave® Joint
Stabilizer & Sealer. Available in a wide variety of
elegant colors, UltraMix® Designer Series products
combine unprecedented aesthetic with industry leading
technology.
• Meets ASTM C-144 requirements
• Vivid, permanent colors
• Dust and haze free
• High structural strength
• Compliments popular paver and stone colors
• Custom colors available via special order
II. Tool Recommendations:
•Pushbroom/whiskbroom
•Handtamp/vibratoryplatecompactor
III. Matierial Recommendations:
For use with:
•Pavers
•Bricks
IV. Coverage
Coverage rate is dependent on joint depth and width.
TYPICAL USES:COVERAGE up to:
• Pavers & Bricks
• Natural Stone
• Flagstone
105 Ft
2
Per 50lb. Bag
(See coverage rates in Section IV)
Install guidelines and application rates may vary. If
product does not match bag image at left, please
contact manufacturer technical support at 877-356-2250.
Joint Width
¾" - 1"
45 Ft
2
35 Ft
2
25 Ft
2
½" - ¾"
65 Ft
2
50 Ft
2
35 Ft
2
¼" - ½"
85 Ft
2
65 Ft
2
45 Ft
2
1
/
16
" - ¼"
105 Ft
2
80 Ft
2
55 Ft
2
Ft
2
/50lb bag
Light Trac Paver
40mm <> 1-5/8"
Standard Paver
60mm <> 2-3/8"
Heavy Trac Paver
80mm <> 3-1/8"
•NaturalStone
•Flagstone