User's Manual
Table Of Contents
- INSTALLATION INSTRUCTIONS
- 1.1 Introduction
- 1.2 Description
- 1.3 Purpose of Equipment
- 1.4 Model Variation
- 1.5 Technical Characteristics
- 1.6 Certification Summary
- SECTION 2
- 2.1 Equipment Packing Log
- 2.2 Transceiver Installation
- 2.3 Installation Kit - Contents
- 2.4 Antenna Installation
- 2.5 Installation - Pin Locations and Connections
- 2.6 Physical Dimensions
- 2.7 Wiring Instructions
- 2.8 Transmitter Side Tone Level Adjustment
- 2.9 Main and Guard Noise Squelch Adjustment
- 2.10 Reference Layouts
- SECTION 3
08RE398 TDFM-136B Installation Instructions
3.2.5 PROCEDURE
A. Operate the TDFM-136B transmitter on the following frequency for at least 20 seconds.
Observe the GPS for any degradation in satellite status or availability or flags.
Frequencies GPS #1 GPS #2
Pass Fail Pass Fail
143.1800 MHz
143.1825 MHz
157.5000 MHz
157.5425 MHz
NOTES:
3-4 Technisonic Industries Ltd.