User's Manual
Table Of Contents
- INSTALLATION INSTRUCTIONS
- 1.1 Introduction
- 1.2 Description
- 1.3 Purpose of Equipment
- 1.4 Model Variation
- 1.5 Technical Characteristics
- 1.6 Certification Summary
- SECTION 2
- 2.1 Equipment Packing Log
- 2.2 Transceiver Installation
- 2.3 Installation Kit - Contents
- 2.4 Antenna Installation
- 2.5 Installation - Pin Locations and Connections
- 2.6 Physical Dimensions
- 2.7 Wiring Instructions
- 2.8 Transmitter Side Tone Level Adjustment
- 2.9 Main and Guard Noise Squelch Adjustment
- 2.10 Reference Layouts
- SECTION 3
08RE398 TDFM-136B Installation Instructions
For the following tests (E & F), select a frequency at the top, middle and bottom of the
band of the TDFM-136B Transceiver.
VHF Band (138 to 174 Mhz)
Frequency No. 1
Frequency No. 2
Frequency No. 3
E. At a safe altitude engage the autopilot or stability augmentation system. Modulate the
TDFM-136B on the above frequencies for at least 20 seconds. Observe any effect on the
autopilot or stability augmentation system.
Observations:
F. Perform a coupled ILS approach to the aircraft’s certified limits. Modulate the TDFM-136B
transmitter on the above frequencies for at least 20 seconds. Observe any effect on the
autopilot. Repeat for second flight director/autopilot if so equipped.
Observations:
3-8 Technisonic Industries Ltd.