User's Manual

2-7
2.14 CUSTOMER PROGRAMMING SOFTWARE (CPS™) - continued
Programming Cables for units with Type I modules
The following items are Motorola part numbers and are required to program the TDFM-600/6000 with type
I modules. They must be purchased from Motorola Customer service (1-888-567-7347).
P/N RVN4182 CPS Programming Software, Note: Latest revision will be provided.
P/N RLN10150 Smart RIB Interface Box
P/N 0180202E27 Smart RIB AC PWR PAC 110V
P/N 3080390B48 Computer RIB Cable
A Technisonic type I programming cable P/N 013524-1 is also required and available from Technisonic.
If encryption keys need to be loaded via a KVL-3000, key loader cable P/N 047381-1 may be also be
obtained from Technisonic. This keyloader cable will plug into the rear connector of the TDFM-600/6000
transceiver and work with type I or type II modules.
If the AMS-6000 is used with a TDFM-600/6000 transceiver with type I modules the following
programming cables plug directly into the AMS-6000 front panel connector. They are available from
Technisonic.
P/N 037347-1 AMS-6000 Download/Programming Cable that mates with RIB interface
Box to program TDFM-600/6000 units employing type I modules.
P/N 037352-1 AMS-6000 Encryption Keyload Cable that mates with Motorola KVL-3000
Keyloader. Same P/N for type I or type II modules.
Programming cables for units with Type II modules
The TDFM-600/6000 series transceivers that employ type II modules do not require a Smart RIB box, AC
power pack or computer RIB cable. A Technisonic PC-6000 II programming cable, P/N 047366-1 and
Motorola CPS Programming software, P/N RVN4186 (Latest revision) is all that is required to program
transceivers with type II modules. Programming cable P/N 047366-1 must be ordered from Technisonic and
cannot be field fabricated. The CPS Programming software P/N RVN4186 must be ordered from Motorola
Customer service (1-888-567-7347).
If encryption keys need to be loaded via a KVL-3000, key loader cable P/N 047381-1 may be also be
obtained from Technisonic. This keyloader cable will plug into the rear connector of the TDFM-600/6000
transceiver and work with type I or type II modules.
If the AMS-6000 is used with a TDFM-600/6000 transceiver with type II modules the following
programming cables plug directly into the AMS-6000 front panel connector. They are available from
Technisonic.
P/N 047365-1 AMS-6000/TDFM-636 Download/Programming Cable that mates with PC computer
to program TDFM-600/6000 units employing type II modules.
P/N 037352-1 AMS-6000/TDFM-636 Encryption Keyload Cable that mates with Motorola KVL-
3000 Keyloader. Same P/N for type I or type II modules.
The TDFM-636 transceiver employs a front panel programming connector identical to the AMS-6000. The
above cables can plug directly into the TDFM-636 front panel.