User's Manual

2-9
2.17 FRONT PANEL PROGRAMMING (FPP) MODE - continued
RX NAC – Enter the desired receive P25 NAC code as above.
RX TYPE – Select the receive mode using the UP and DN keys – Analog, digital or mixed.
Mixed mode will allow the receiver to decode analog and P25 digital signals as needed.
TX TYPE – This prompt will only come up if you selected mixed for RX. Select analog or digital.
BANDWIDTH – Select 12.5, 20.0 or 25.0 kHz using the UP and DN keys. Bandwidth may also
be called ‘Channel Spacing’.
CHANNEL NAME – Use the UP and DN keys to scroll to the desired letter and press the NXT
soft key to get to the next character. Press ‘OK’ when done. There will be a delay while
the channel is saved, then the display will return to normal.
The following is a list of the standard PL tones:
Number
Tone Number Tone Number Tone
01 67.0 13 103.5 25 156.7
02 71.9 14 107.2 26 162.2
03 74.4 15 110.9 27 167.9
04 77.0 16 114.8 28 173.8
05 79.7 17 118.8 29 179.9
06 82.5 18 123.0 30 186.2
07 85.4 19 127.3 31 192.8
08 88.5 20 131.8 32 203.5
09 91.5 21 136.5
10 94.8 22 141.3
11 97.4 23 146.2
12 100.0 24 151.4
Standard DPL Codes:
017 051 116 156 243 266 346 431 466 612 721
023 053 122 162 244 271 351 432 503 624 731
025 054 125 165 245 274 356 445 506 627 732
026 065 131 172 246 306 364 446 516 631 734
031 071 132 174 251 311 365 452 523 632 743
032 072 134 205 252 315 371 454 526 654 754
036 073 143 212 255 325 411 455 532 662
043 074 145 223 261 331 412 462 546 664
047 114 152 225 263 332 413 464 565 703
050 115 155 226 265 343 423 465 606 712