User's Manual

3-3
SECTION 3
INSTALLATION INSTRUCTIONS
3.1 GENERAL
This section contains information and instructions for the correct installation of the TDFM-7300 Transceiver.
3.2 EQUIPMENT PACKING LOG
Unpack the equipment and check for any damage that may have occurred during transit. Save the original
shipping container for returns due to damage or warranty claims. Check that each item on the packing slip has
been shipped in the container.
3.3 INSTALLATION
The TDFM-7300 Transceiver is designed to be Dzus mounted and should be installed in conjunction with an IN-
7300 installation kit. See Figure 3-1 for an outline drawing of the unit with dimensions to facilitate the
installation.
3.4 INSTALLATION KIT - CONTENTS
The IN-7300 installation kit (P/N 059615-1) consists of:
1. One 25 pin Cannon D mating connector (female) complete with crimp pins and hood.
2. One 9 pin Cannon D mating connector (female) complete with crimp pins and hood.
3. 4 BNC connectors.