Data Sheet

Quick reference MA12022
Download the App
Download the MOBILE-ALERTS app from "Apple
App Store" or "Google Play".
Connect the Gateway
Connect gateway (connection DC IN 12V) to power
supply using the supplied AC adapter. Connect
included LAN cable with gateway and your router.
After about 10 seconds, the Gateway is in
operation. The LED will turn static green. Use a
separate connection cable to connect the router to
the gateway (DC OUT for 12 V and maximum 2A)
to ensure power supply in the event of a power
failure.
If no DHCP server is available in your network, you
can configure the gateway in the app
under the point “Settings” manually.
Important: The Gateway should always be put
into operation before starting the sensors!
Read measurements
After adding a sensor you can read the
measurements on your mobile phone.
Button functions
- Press the ON/OFF button to turn the gateway
on/off
- Press the Upload button to manually upload
received sensor data to server
Troubleshooting
When no sensor readings are displayed in the app,
check if the LAN and DC LEDs on the gateway are
permanently lit. If not, please check if:
- The gateway is properly connected to the power
plug, the router and is turned on. (LAN and DC
LEDs are lit)
- The batteries in the sensor are inserted with the
correct polarity.
- Restart the sensor by removing the batteries for a
minute and reinserting, to restart the sensor.
- Your phone is connected to the internet.
- The signal is weakened by thick walls and
ceilings. Put the sensor in operation near the
gateway and then locate a suitable location.
Back-Up Function
- The gateway can still receive and log data (Data
LED lit) for up to 10 hours after a power failure.
- If the power fails, the router connected to the
gateway can still be supplied with power for 10
minutes.
- After the mains voltage has been restored, the
back-up batteries are recharged (charge LED is lit).
Specifications
Dimensions: 134 x 26 x 96 mm
Back-Up Batteries: 2 x 18650 rechargeable
lithium battery
(2000mAh)
Power in: AC/DC adapter,
12Vdc 2.5A
Power out: 12 Vdc 2.0Amax
More information and detailed instructions can be
found in the app at “Info” or at
www.mobile-alerts.eu
Summary of the Declaration of Conformity: We
hereby declare that this device does comply with
the requirements of RED Directive 2014/53/EU.
The declaration of Conformity can be found at:
www.mobile-alerts.eu/technoline/doc
Old batteries do not belong into
general household waste because they
could cause damages of health and
environment. You can return used batteries free of
charge to your dealer and collection points. As
end-user you are obliged by law to bring back used
batteries to distributors and other collecting points!
This symbol signifies that you must
dispose electrical devices separately
from the general household waste when
it reaches the end of its useful life. Take
your electronic to your local waste collection point
or recycling centre. This applies to all countries of
the European Union, and to other European
countries with a separate waste collection system.