User manual

Quick reference
MA10350 thermo- hygrometer with water detection cable
sensor
MOBILE-ALERTS Sensor
This is a sensor for the "MOBILE-ALERTS" system, it
can be used with this system only. To use the sensor
you need a MOBILE-ALERTS gateway.
Sensor set up
Open the battery compartment of the temperature
sensor and put in 2x AAA batteries with the correct
polarity. Place the H2O probe (H2O logo at the top), in a
location, where water leakage may occur ( for example
behind the washing machine).
Add Sensor
Open the app, dashboard is displayed. Tap "Add new
sensor" and scan the QR code on the back of the
temperature sensor. Then set a name for the sensor.
Specifications
Batteries: 2 x micro (LR03, AAA)
alkaline
Battery life: approx. 2 years
Measuring range temperature: – 39.9°C to +59.9°C
Accuracy: 1 °C
Measuring range humidity: 20-99%
Accuracy: 3%
Measurement intervals: 7 minutes
Transmission range: 100m (open area)
Cable length: 1,5m
More information and detailed instructions can be found
in the app at “Info” or at www.mobile-alerts.eu
The declaration of Conformity can be found at:
www.mobile-alerts.eu/technoline/doc
Old batteries do not belong into general
household waste. You are obliged to return
used batteries to your vendor or collection
points.
Electrical devices have to be disposed
separately from the general household waste.
Take your old electronics to your local waste
collection point or recycling centre.