Operation Manual

8.4 Temperature Alert Function:
 Hold “ALERT” button (B5) for 3 seconds to enter Temperature Alert setting,
Temperature’s digits flash.
 Press “▲” (B1) or “▼” (B4) button to select Indoor or Outdoor temperature alert.
Press “ALERT” button (B5) to confirm the setting.
 Press “▲” (B1) or “▼” (B4) button to set the upper” ” and lower “ ” limit of the
temperature. Press “ALERT “button (B5) to confirm the setting.
 Press “ALERT” button (B5) to set the Temperature Alert function ON or OFF (“ ”
appears on the LCD if this function is activate).
9. Low batteries indication:
The low battery icon “ ”will appear when outdoor rain sensor is in low battery
status. The batteries should be replaced.
10. Precautions
 Use a pin to press the reset button (B7) if the Unit does not work properly.
 All Setting Modes will automatically exit in 15 seconds without any adjustment.
 The clock loses its time information when the battery is removed.
 Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
 Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
 Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
agents may scratch plastic parts and corrode electronic circuits