Operation Manual

ManualsBrandsTechno line ManualsMiscellaneousWT 498

INSTRUCTION MANUAL WT 498

INSTALLATION BY AC-ADAPTOR

For best reception of radio controlled signal, keep your clock close to a window and away from

metal surfaces, electrical appliances and magnetic fields. Plug the AC/DC adaptor to an AC

household outlet, then plug the DC jack to the back of the clock. Your clock is ready to work for

you.

INSTALLATION BY BATTERIES

1. Slide open the battery cover at the bottom of your unit.

2. Insert 3 x AAA batteries into the battery compartment by observing the correct + / - polarity

signs inside the battery compartment.

3. Replace the battery cover.

4. In case it is too bright in night time, please only use by batteries / without adaptor.

When only batteries are being used, the always-on backlight is off. Press SNOOZE/LIGHT will

light up the LCD for few seconds to view time if need. If user unplugs the DC jack, the clock

will stop to work and no time / alarm. Please remember to put batteries in the clock if user

wants to unplug it.

Summary of content (4 pages)

PAGE 1
INSTRUCTION MANUAL WT 498 INSTALLATION BY AC-ADAPTOR For best reception of radio controlled signal, keep your clock close to a window and away from metal surfaces, electrical appliances and magnetic fields. Plug the AC/DC adaptor to an AC household outlet, then plug the DC jack to the back of the clock. Your clock is ready to work for you. INSTALLATION BY BATTERIES 1. Slide open the battery cover at the bottom of your unit. 2.
PAGE 2
DCF SINGAL RECEPTION AND SIGNAL INDICATOR After your clock is powered up, it starts to receive DCF signal. The Weak or no DCF signal Receiving strong DCF signal Successful Reception Failed Reception icon flashes. icon flashing) (only ( icon flashing) ( icon becomes static) ( icon disappear) Automatic reception and Manual Reception Your clock starts automatic reception everyday at 1:00, 2:00, 3:00. If it fails to receive the DCF time signal at 3:00, it will start reception at 4:00.
PAGE 3
FR = French IT = Italian NE = Dutch ES = Spanish DA = Danish 8. Press SET to return to normal mode, or it will return to normal mode in around 30 seconds if no press of any other buttons. TO SET ALARM TIME Press and hold ALM SET / ON-OFF once, time digits change to alarm time digits “0:00 AL” and hour digits flash. Then press +/- to set your desired hours of alarm time. Press ALM SET / ON-OFF once, alarm minute digits flash. Press +/- to set your desired minutes of alarm time.
PAGE 4
CARE OF YOUR RADIO CONTROLLED CLOCK 1. Do not expose the unit to extreme temperature, water or direct sunlight 2. Avoid contact with any corrosive materials 3. Do not subject the unit to excessive force, dust or humidity 4. Do not open the inner back case or tamper with any components of this unit SPECIFICATIONS Indoor Temp. Range Temperature Resolution Alarm Duration -10°C to +50°C (+14.2°F to +122°F) 0.