User's Manual

NFC User Manual.doc
Pag. 4 di 8
TECHNOGYM S.p.A.
Via G. Perticari, 20 - 47035
Gambettola (FC) - Italia
Tel.: [phone]
Rev. 1.0
Author: Alessandro Cevoli
Data di stampa
: 27/06/13
This block diagram can be better understood in the next picture, overlayed with the real
equipment:
Picture 2 – Equipment with overlayed block diagram
The connection to the host is made by means of a cable that allows:
- Device powering;
- Data communication (the host SW manage a serial port switch to enable once the
NFC reader and once the Mifare reader, working in time slots).
The module antenna is embedded on the board and its positioning on the equipment is
shown with a specific indication:
Picture 3 – NFC and Mifare indications.
Technogym equipment (host)
NFC
reader
(first)
Mifare
reader
(second
Mifare reader
indicator
NFC antenna
indicator