Instruction manual

Instruction manual KT-100
To programm:
1. Press the MIN and SEC buttons and input the chosen time
Starting the timer:
2. After inputting the time press the START/STOP button.
3. The timer runs to 00:00, then the alarm sounds for 30 seconds
4. The alarm can be stopped by pressing the START/STOP button.
Reprogramming or stopping the timer during operation:
5. The timer can be stopped or reprogrammed at anytime. Restart by pressing the START/STOP
button.
6. To reset to 00:00, press the MIN and SEC button at the same time.
Repeating the same countdown:
7. By pressing the START/STOP button after the alarm has stopped, the countdown will restart.