Specifications

57
1. The wind direction alarm display will be shown.
2. Press and hold the SET key for about 2 seconds. The wind direction arrow on the
outside of the compass circle will start flashing with the corresponding compass
direction or degrees reading displayed in the center of the compass.
3. Press the ▲UP ARROW key or ▼DOWN ARROW key to move the wind
direction alarm pointer.
4. Press the SET key to set a wind direction alarm. A pointer icon will appear inside
of the compass circle to indicate an alarm setting for that wind direction.
5. To remove an alarm setting for a wind direction, press the SET key again to
remove the selected wind direction alarm. The arrow icon inside the compass
circle will disappear.
6. If more than one wind direction is desired as an alarm setting, Press the ▲UP
ARROW key or ▼DOWN ARROW key to move the wind direction alarm pointer
to the next desired setting.
7. Press the SET key to confirm the next wind direction. A pointer icon will appear
inside of the compass circle to indicate an alarm setting for that wind direction.
You can set as many wind direction alarms as you desire.
8. Press the ALARM key to confirm the setting. The wind direction arrow will stop
flashing.
9. Press the SET key to switch on or off the alarm. The ((())) icon indicates the
alarm is switched on.
10. Press the ALARM key to move to the 24h rainfall alarm settings.
24H RAINFALL ALARM
1. The 24h rainfall alarm display will be shown.
2. Press and hold the SET key for about 2 seconds. The 24h rainfall digit will start
flashing.
3. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the 24h rainfall
value. Hold the key in to change the value faster.
4. Press the ALARM key to confirm the setting. The digit will stop flashing.