RADIO CONTROLLED WIRELESS WEATHER STATION User’s instructions 433MHz THERMO SENSOR
The multifunctional weather station is equipped with many functions providing thorough weather information to you. The receiver unit has a clea r, easy-to-read display that shows weather forecast, minimum/maximum indoor and outdoor temperature, as well as time and date. It is able to receive and display readings from up to 3 remote sensors. The 433 MHz technology means no wire installation is required and you can place the sensors anywhere you like.
MAIN FEATHERS: WEATHER STATION: No. of remote unit: up to 3 units RF transmission range: maximum 80 meters free field Temperature sensing cycle: around 60-64 seconds 1 Radio controlled signal: POWER 12 Main unit: 3V, use 2 xAA 1.5V alkaline battery Remote sensor: 3V, use 2 xAA 1.5V alkaline battery 2 10 11 3 DCF 14 13 4 DIMENSION 7 5 8 6 15 16 Main unit: 86(W) x 164(H) x 60(D) mm Remote sensor: 65(W) x 115(H) x 20(D) mm 9 1.
USING THE TABLE STAND OR WALL MOUNTING 4. CLOCK TIME WINDOW - Displays normal time, alarm time, date and day of the week. The receiver has both desktop and wall-mounting structure. Place the screw on the desired wall and hang the clock by the wall mount in the back of it or just simply place it on the desktop by its table stand. For the transmitter, fix the wall-mount holder on the wall or simply place it on the table. 5. TIME key: - Press and hold it for 2 seconds to enter normal time setting.
- Press and hold it for 3 seconds to delete the minimum and maximum temperature records. 10. °C/°F key - Press it to switch between Celsius and Fahrenheit. - Press and hold it for 3 seconds to receive the RC signal for reception testing. 11. YEAR key - Press it to switch between Month/Date and Year display. 12. CHANNEL key - In setting mode, press it to increase the setting values. - In normal time mode, press it to switch among Channel 1, 2 and 3.
thoroughly. Try out where the station receives the signals best. TRANSMITTER CHECKING AND DELETING MAX/MIN TEMPERATURE RECORDS 6 1 3 2 5 433MHz THERMO SENSOR 1. 2. Press “MAX/MIN” key once to check the maximum temperature records. Press it twice to check the minimum records. Press it again to exit. Press and hold “MAX/MIN” for 3 seconds to delete the maximum and minimum temperature records with “beep” tone. MAX. Temperature records MIN. Temperature records 4 7 1.
2. 3. Insert 2 x AA size batteries into the battery compartment. Make sure you insert them the right way according to the polarity information marked on the battery compartment. Replace the battery door. NOTE: 1. 2. NOTE: 1. 2. Once the channel is assigned to one transmitter, you can only change it by removing the batteries or resetting the unit. Avoid placing the transmitter in direct sunlight, rain or snow. WEATHER STATION: 1. 2. 3.
4. 5. The 5 languages weekday settings are represented by the below abbreviations: GB= English FR= French DE=German ES= Spanish IT= Italian Press “TIME” key to confirm and exit the setting or let it exit automatically 30 seconds later without pressing any key. English SU MO TU WE French DI LU German Spanish SO MO DO LU Italian DO LU MA ME DI MA MI MA ME JU GI VE TH JE FR SA VE SA MI DO FR SA VI SA ABOUT THE WEATHER INDICATOR The built-in barometer can notice atmospheric pressure changes.
DAYLIGHT SAVINGS TIME (DST) When used for the first time (after inserting the batteries or pressing the “RESET” key), the clock will start to receive the RC signal in 5 minutes with the signal strength indicator flashing. The clock has been programmed automatically to switch when the daylight savings time is in effect.Your clock will show “DST” during the summer. SIGNAL STRENGTH INDICATOR MANUAL TIME AND CALENDAR SETTING The signal indicator displays signal strength in 3 levels.
