User's Manual
Page 36 
and press gently on the left edge to 
snap the new battery in place. 
 Slide the compartment door back on 
until the release button snaps back in 
place. 
CHAPTER 8: SOFTWARE UPDATE 
Before initiating a software update, the WI-FI 
network has to be configured with the help of 
a sighted person. 
 Press and hold the Back button to 
access the Settings, and scroll down to 
select All Settings. Tap to open. Scroll 
down to select General and tap. Scroll 
down to select WI-FI Setup and tap. 
  Tap the OFF button on the top edge of 
the screen to switch it to ON. 
 Tap on the network you wish to 
configure. 
 To enter your password, tap on the 
blinking cursor. A keyboard will appear 
on the screen. Enter the password and 
tap on Done. Then, tap on Connect. 
Page 37 
  Press Back twice to return to General in 
Prodigi’s Settings. 
To initiate a software update, scroll down to 
select Software Update and tap. 
IMPORTANT: Make sure your system is 
connected to power before updating the 
software. 
 Once the WI-FI connection is 
established, Prodigi will tell you whether 
your software is up to date or whether 
an update is available. 
  If an update is available and you wish to 
install it, scroll down to select Install and 
tap. If you wish to cancel, select Cancel 
and tap. 
 If you chose to install the update, 
Prodigi will download the update and 
show the download progress in 
percentage. 
  Once the download is complete, Prodigi 
will reboot and install the update 
automatically. Android’s green logo will 
be shown on screen during the update. 










