User's Manual

Page 38
CHAPTER 9: TROUBLESHOOTING
If the image on the screen is flickering
while magnifying:
 Make sure that the Working Range is
set to Close-up in the Settings.
If the screen is blank:
 Zoom out of the image for minimum
magnification.
 The Tablet could be powered off or in
Standby Mode. Press Power to power it
on or to exit Standby Mode.
If colors are difficult to detect:
 Check if you have sufficient ambient
light.
 Choose a different contrast or color
combination in the Settings.
 Adjust the brightness level in the
Settings.
If there is a lot of glare:
 Tilt object in a different direction to
reduce glare.
 Reduce the brightness level in the
Settings.
Page 39
 Reduce external lighting effects.
 If the camera’s flash is turned on and
your captured image is too bright or
uneven, turn off the flash in the Settings
and capture a new image.
If the image/text is out of focus or blurry:
 Use the Plus-Minus keys to zoom in and
then out of the image so as to trigger the
camera’s focus. If needed, capture a
new image of your document.
 Make sure you hold the camera still
while capturing an image.
 Turn on the camera’s flash in the
Settings and capture a new image.
 Make sure your Tablet is powered off,
and wipe the LED lights and camera
surface on the back side with your
included cleaning tissue.
If the audio reading does not make sense:
 Make sure the voice setting is the same
as your document’s language. Change it
in the Settings if necessary.
If the Tablet is not responding:
 Make sure the battery is not empty.
Recharge it if necessary.