User's Manual

Page 12
Note: If the captured image is too dark,
blurry, or unfocused, you may want to turn on
the camera’s flash and capture a new image.
Press and hold the Back button to access the
Settings and select Flash. Tap to set it to On.
Press Back to exit the Settings.
Turning on or off the camera’s flash is only
possible when the camera’s Working Range
is set to Full Page.
CHAPTER 4: SWITCHING TO
STANDARD INTERFACE
Prodigi contains two different interfaces,
Simple and Standard, which can be changed
according to your specific needs. By default,
Prodigi’s interface is set to Simple (see
previous chapter for more information).
Prodigi’s Standard interface allows you to
perform more touch gestures, keep your
documents in memory, and further customize
your system.