User's Manual
Table Of Contents
- Chapter 1 Introduction of Tablet
- 1. Basic Operation
- 1).Charging& Battery Management
- It is suggested to fully charge the battery before use. The best state for the battery is after charged and discharged two or three times.Charging Process: connect the power adapter one end to your tablet, and plug the other end of power adapter to th...
- 2). Turn on/off
- (2).Turn off: Press & hold the power switch for around
- 3 seconds and the system will popup out power off option, tap on it to turn the tablet off.
- 2. Standby & Unlock
- 1)、Automatic Standby: there are no any operation to the device under the system default or in set time state, device will shutdown screen, and enter standby state
- automatically.
- 4. Custom Homepage Interface
- 5. G-sensor
- Chapter 3 Basic Settings
3
Under opening G-sensor function state, when you rotate
the tablet, the screen will automatically change the display
direction.
On the quick guide settings, slide auto-rotate screen key
left or right to open or close G-sensor.
6. Switch of Input
When inputting text, click the keyboard icon of status bar.
It will pop up an Input menu options, Click on the input
method you need is ok. Or enter setting interface, click the
“language &input” to set.
7. SD Card Usage
This MID is equipped with memory card slot, you can put
sources in it. When using, please insert the memory card
correctly in accordance with the method of card slot.
When take out the SD card, pls click “
” “Settings”
“Storage” “Unload SD card”, after safty remove,
push the SD card into the slot, and then release, then take
out SD card.
〖Reminder〗: 1). In the process of using a memory card
to read and write, pls do not for hot plug , in case of