User's Manual
Table Of Contents
- Chapter 1 Introduction of Tablet
- 1. Basic Operation
- 1).Charging& Battery Management
- It is suggested to fully charge the battery before use. The best state for the battery is after charged and discharged two or three times.Charging Process: connect the power adapter one end to your tablet, and plug the other end of power adapter to th...
- 2). Turn on/off
- (2).Turn off: Press & hold the power switch for around
- 3 seconds and the system will popup out power off option, tap on it to turn the tablet off.
- 2. Standby & Unlock
- 1)、Automatic Standby: there are no any operation to the device under the system default or in set time state, device will shutdown screen, and enter standby state
- automatically.
- 4. Custom Homepage Interface
- 5. G-sensor
- Chapter 3 Basic Settings
4
causing memory card data damage.
2).When using PC format to store, please select the FAT32
format.
8. Connection with PC
Use the USB cable provided to connect the tablet with PC.
User can choose the files and directories of tablet
through the PC.
1). under the tablet main interface, use the USB cable
provided to connect the tablet with PC, device will pop
up the USB connection window, click” Turn on USB
storage” to connect to PC, In the connection mode, you
can read the data of the tablet on the PC.
2)、Please don't change the name of root directory, in case
of causing a file to read error by application programs.
3)、Be sure to keep the tablet power is sufficient, in case it
is unable to identify when connected with computer.
Chapter 3 Basic Settings
Under main interface, click“ ” settings. The settings
interface is divided into wireless & network ,device,
persional, account and system five categories.
1. Wireless & Network