3. Insert IC card Insert IC card as below picture 19. Please make sure you face the back side of the IC card. Picture 19 4. Thermal Printer: Close printer cartridge Put the printing paper outward as below picture 20 , and leave some blank paper outside printer cartridge, then close the cartridge.
Open printer cartridge Buckle-out switch of printer cartridge as below picture 21. Picture 21 Press the bottom side of the switch as below picture 22.
Printer cartridge opened as below picture 23 , and then can put into the print paper Picture 23 5. Charging Indicator Charging indicator as below picture 24 is in red color when charging, and in green color when fully charged.
Troubles Shooting 1. Device cannot startup Make sure that the batteries do not run out. AMake sure the power adapter is securely connected. Make sure you are using the standard power adapter. Make sure that the machine was already open. 2. The system is abnormal and can’t work. When you install some third party application procedure, it may cause abnormal work, you can press Reset key (next to power port) to reset the system. 3.
6. Device is hot When many application procedures are used in meanwhile or the brightness of screen open to the lightest or under charging, device may feel fever. It is normal. 7. Media Player no sound Unplug the headphones, reconnect. Make sure the headphone jack has been deep into the headphone jack. Volume may be set too low or muted volume is set. Check the volume settings for software. 8.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital devi ce, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructio ns, may cause harmful interference to radio communications.
