User Manual

1134
Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice.
Page 15 of 19
1134 LF Reader User Guide V1.2 .pdf
www.tsl.uk.com
© Technology Solutions (UK) Ltd
12 Technical specifications
12.1 Summary of specifications
The following table summarises the 1134 LF Reader’s intended operating environment and
technical hardware specifications:
Performance Characteristics
RF Transmit Frequency
125kHz, 134.2kHz
Supported RFID Standards
ISO 11784, ISO 11785, ISO 18000-2
Supported Tag-ICs
NXP HITAG1, HITAG2, HITAGS
Sokymat Q5
EM Microelectronics EM4x02, EM4x05 (ISO
FDX B), EM4x50
Texas Instruments 64 bit Read Only, 64
Read Write, 1088 bit Multipage.
Typical read time (serial number only)
HITAG 2 – 30ms
HITAG S – 59ms
EM4002 – 65ms
EM4005 – 58ms
EM4050 – 95ms
Q5 – 55ms
Texas Instruments – 93ms
Host interface
Serial interface on COM2 of MC55/65, ASCII
or Binary Protocols 9600bit/s to 115200bit/s
8,N,1.
Reading distance
Dependent on transponder type and antenna.
Typically up to 8cm for Texas Instruments
32mm glass, up to 6cm for EM4102 30mm
diameter disc.
Current consumption
Current Consumption
< 100mA during RFID read
< 60mA in idle mode
< 30mA in standby mode
User indication
Red, Green LEDs
Flash indicating activity (function may also be
customised).
Connection Interfaces
Physical interface
USB and power in to charge MC55/65