User's Manual
Table Of Contents
- Content
- Introduction
- Parts of the 1153 UHF Reader
- Using the 1153 UHF Reader
- Connections
- Bluetooth® wireless technology connection
- Micro SD Card
- Software Development
- Troubleshooting and Maintenance
- Regulatory information
- Health and Safety Recommendations
- Waste Electrical and Electronic Equipment (wEEE)
- Warranty
- About TSL
1153 UHF Reader User Guide V1.23© Technology Solutions (UK) Ltd 2014
14
BLUETOOTH
®
WIRELESS TECHNOLOGY CONNECTION
COMPATIBLE APPLE PRODUCT MODELS
OTHER COMPATIBLE PRODUCTS
SETTING UP A
BLUETOOTH
®
CONNECTION WITH AN APPLE PRODUCT
The 1153
Bluetooth
®
Handheld UHF RFID Reader is compatible with many other
Bluetooth
®
wireless technology
enabled host devices including Android, Windows CE, Windows Mobile 5/6.1/6.5 and Windows XP/Vista/7/8.
Awaken the 1153 UHF Reader by squeezing the trigger, which is confirmed by the flashing of the blue LED. To pair
with your iOS device, navigate to the
Bluetooth
®
option within the Settings menu on your iOS device.
CONNECTIONS
The connection to the 1153 is either via Bluetooth or USB. Bluetooth connections use either a Virtual Com Port
(VCP) or via the iAP protocol for Apple devices. Over USB only VCP is available.
For VCP the connection is established at 115200 baud, 8 data bits, no parity, 1 stop bit and RTS/CTS (hardware)
flow control.
www.tsl.uk.com