User's Guide
Table Of Contents
2166 UHF Reader User Guide V1.09Copyright © 2019 Technology Solutions (UK) Ltd
18
CONNECTIONS
● Select Action>Reset Bluetooth to SPP mode (wait for the process to complete)
● Disconnect the UHF reader from the computer (unplug USB)
● Wake the UHF reader (pull trigger, blue flashing LED)
● Pair to the reader on the device
● Launch an Application (e.g.
RFID Explorer
) to use the reader
(*) if not download from here
http://www.ftdichip.com/Drivers/VCP.htm
Further Information
Further information can be found from the Reader Download pages (free, one-time, registration required - see links
above)
Application Note – Bluetooth
®
HID mode
: Provides further examples for configuring HID mode
Application Note – Using the Micro SD log and auto-run files
: Describes using the AUTO.TXT
TSL ASCII Protocol 2.4 Rev B
: Details all the commands including for HID .st,.hs,.hc, and .hd
If you encounter any issue while following the above procedure please contact
support@tsl.com
providing the
following information:
● The serial number of the UHF Reader
● The Firmware version of the UHF Reader
● The step at which the procedure failed
● A description of the fault that occurred
www.tsl.com