User's Guide

2166 UHF Reader User Guide V1.09Copyright © 2019 Technology Solutions (UK) Ltd
7
To install the battery, first orientate the battery so that the electrical contacts on the battery line up with the contacts
inside the 2166 battery cavity. Slide the battery into the battery cavity, then replace the Battery Cover. Make sure
that the ‘Battery Pull Tab’ does not get stuck between the battery cover and the battery cavity - if this happens then
the environmental sealing will be compromised.
Figure 3: Battery Pull Tab - Correct and Incorrect posiitoning
‘Battery Pull Tab’ is trapped
between seal
Tuck Battery Pull Tab
out of the way
1 2
Replace Battery Cover
‘Battery Pull Tab’ is tucked behind
battery cover
USING THE 2166 UHF READER
Installing the Battery
CAUTION!
RISK OF EXPLOSION IF
BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED
BATTERIES ACCORDING
TO THE INSTRUCTIONS.
www.tsl.com