INTRODUCTION 2 Overview Main Features EASY INSTALLATION GUIDE 4 SAFETY INFORMATION 7 CHECK POINTS BEFORE USE 9 Accessories Satellite Dish CONTROLS/FUNCTIONS 10 Front Panel Rear Panel Remote control Front Display EQUIPMENT CONNECTION 15 Connection With Antenna/ TV Set/ A/V System OPERATION 17 Getting Started System Settings Edit Channels EPG (Electronic Program Guide) Games USB Menu (How to download SW from USB) System Information Common Interface Conditional Access System DVR PIP HOW TO D
Parental, Installation & Receiver Lock Zoom function on Pause & Live channel OVERVIEW This satellite receiver is designed for using both free-to-air and encrypted channel reception. Enjoy the rich choice of more than 10,000 different channels, broadcasting a large range of culture, sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with the highest qualified electronic parts.
How to Install a New Satellite (Fixed Non-Motorised System) Press the MENU button on the remote and press the OK button on Installation. Press OK on Satellite Setup and OK again to display a Satellite List. To add a Satellite, press the YELLOW ( )button on the remote. Press the EXIT button on the remote to exit the list. After turning ON the receiver, select a language and Country. You will be taken to the Viewing mode. Press the SAT button on the Remote and select a satellite.
If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be adjusted, for example : 000.2, 000.3, 000.4,5/6/7/8/9 West or East. The Latitude may also need to be adjusted. If you still have not got a signal, then the external installation (dish, etc) needs to be adjusted. How to restore default channels Be sure to read the user’s manual before starting the operation of the unit. Do not touch the power cord with wet hands as it may cause electric shock.
Place the unit horizontally. An uneven placement may cause the unit to be damaged. Do not put heavy items such as a TV on the unit. This may damage the unit. ACCESSORIES Remote control : 1 Batteries (AAA type) : 2 Power cord : 1 TM -710 2 HD -T2 User’s manual : 1 Do not leave the unit near water. Do not put water containing items such as vase on the unit. or HDMI cable : 1 Do not install the unit : Where it is subject to vibrations. Where it is exposed to direct sunlight.
REAR PANEL 1. Power : To switch the receiver between “Standby” and “Power ON” modes. 2. Standby/Power Indicators : Red in Standby mode and no light in Power-On mode. 3. Menu : To enter or exit the Main Menu. 4. Select : To open the Channel List in non-menu mode and to select/confirm an item in menu mode. Your Digital Partner for Life 5-6. VOL( / ) : To change the volume level in non-menu mode and to modify a setting in menu mode. 7-8.
REMOTE CONTROL 1. POWER : To turn the receiver On/Off. 22-23. UP & DOWN : To change channels in non menu mode and move the cursor up/down in menu mode. 2. TV/RADIO : To switch between TV and Radio modes. 24-25. LEFT & RIGHT : To change the volume level in non-menu mode. 3. MUTE : To turn the sound On/Off. 26. OK : To show the Channel List in non-menu mode and select an item or confirm in menu mode. 4. TV/SAT : To switch the TV output source between the satellite input and the UHF/VHF antenna input.
FRONT DISPLAY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CONNECTION WITH ANTENNA / TV SET / A/V SYSTEM 1. Connect the TV antenna to TV ANT IN. 17 19 18 20 22 21 2. Connect the Video and Audio of TV to the Video and Audio. Connect Red and White connector to Audio R and Audio L, and Yellow into Video port respectively. 1 Power On/Off mode. 2 It is displayed when a Satellite signal is present. 3. Connect the Component Video of your TV to Component Video of best quality.
3.5”, 2.5” SATA HDD ASSEMBLY INSTRUCTION 1. Turn off AC power. 2. Open the HDD SLOT cover. GETTING STARTED Turn your receiver power on and proceed with system setup as follows : Menu Language Setting 3. Remove HDD Bracket . Push no.1 and pull no 2. 1. Turn on your TV and receiver. 2. The language selection menu will be displayed, select a language and press the OK button on. 4. Screw & assemble HDD and HDD Bracket. 2.5inch HDD & SCREW 3.5inch HDD & SCREW Country 1.
- 22KHz : Select ON/OFF of 0/22 KHz. Tuner Setup - DiSEqC 1.0 : Select DiSEqC 1.0 Port. 1. Press the MENU button on the remote to - DiSEqC 1.1 : Select DiSEqC 1.1 Port. display the main menu and go to Installation 5. Scan : Press Red ( ) button on the remote to begin satellite search. 2. Select Tuner Connection, the Tuner Connection menu will appear. 6. Rename : Press Green ( ) button on the remote to rename the selected 3. Select your Dish setup: satellite.
DiSEqC 1.2 Setup USALS System Setup 1. Select DiSEqC 1.2 on DiSEqC Motor, the 1. Select USALS on DiSEqC Motor, the USALS DiSEqC 1.2 menu will appear. menu will appear. - Satellite : Select any satellite by pressing - Satellite : Select any satellite by pressing / buttons. - Tuner : Select Both(Tuner1) / Both(Tuner2). - Tuner : Select Both(Tuner1) / Both(Tuner2). - Transponder : Displays the current TP value of the - Transponder : Display the current TP value of the selected satellite.
- Scan : Begin channel search of the selected satellite. DiSEqC Motor View Control 1. Select DiSEqC 1.2 or USALS in the Motorized Setting menu. 2. In the viewing mode, Press POS button on the remote to display DiSEqC Motor View Control. 3. Press / 5. Auto Navigation : Press Red ( ) button on the remote. 6. Auto Navigation Blind Search : Press Green( ) button on the remote and then begin Blind Search of the selected satellite.
5. Scan : Press Red ( ) button on the remote to begin satellite search. 6. Add TP : Press Green ( ) button on the remote to add new transponders by using numeric buttons 0~9 and 7. Delete TP : Press Yellow ( PID Search / Edit the information of the current transponder buttons on the remote. PID/Audio PID/PCR PID and search the satellite. ) button on the remote to delete transponders. 1. Press the MENU button on the remote to display the main menu. Terrestrial Scan 2.
TV/ RADIO switching Channel Selection You can press this key to change from a TV channel to a Radio channel or vice If you know the channel number, enter the channel number by using numeric buttons on the remote and wait 2 seconds until the Press to return to the previous channel. If you know the channel name, press OK Audio button on the remote, then the channel list Press to adjust the subtitle and / or audio status of the current channel : will be displayed.
ZOOM V.FORMAT You can press to zoom in the video. Press the V.FORMAT button to change the video resolution : 1080p > 1080i > 720p > 1. Press the PAUSE button and press ZOOM button You can zoom in sections of 576p > 576i Freezed Video. 2. While watching a program, press. You can zoom in sections of playing video. 3. To cancel the freeze status, please release the zoom status.
SYSTEM SETTINGS - Display Format : Select the TV aspect ratio (Letter Box/Pan Scan, Full Screen/Pillar Box) - RF Type : Select among supported PAL standards.(PAL B/G, PAL I, PAL D/K). Time Setting - RF Channel : Set the RF channel to which to display the audio and video signals on your TV set time,wake up time, wake up channel and sleep time.
- Save As Default Channel : Change the factory Password Setting channels. This sub-menu allows you to change the - Restore Default Channels : Restores 25 satellites and password option to access or lock menu entry approx 1,500 channels and to change password. pre-tuned. - Receiver Lock : If you turn it ON, you will be asked to enter PIN code when power on.
5. Set favorite channels by pressing the Data Transfer / and OK buttons on the remote. The selected This sub-menu allows you to transfer the software of a receiver to another receiver. channels will have a heart symbol on the - Firmware : Transfer the firmware of a receiver to another receiver. right. - Games : Transfer the game data of a receiver to another receiver. Press the OK button on the remote again to - All : Transfer all data (Firmware + Channel Data + Games) to another receiver.
Move Channels Skip Channels This sub-menu allows you to move a channel in This sub-menu allows you to skip channels. the list. Once a channel is skipped, every time you try to You can switch between TV or Radio channels change the channel using by pressing the TV/RADIO button. 1. Press the OK button on Move Channels, the Move Channels menu will appear. 2. Press the OK button to select the channel that you want to move, then arrow buttons will appear. 3.
EPG (ELECTRONIC PROGRAMME GUIDE) Add Channels 1. Select the satellite and save in the Satellite setup before Add Channels. - Satellite : Select a transponder which you want to search. - Transponder : Display the Transponders of the selected satellite. - Channel Name : Press OK button on the Channel Name that you want to edit. - Channel Type : Select TV/Radio.
3. Press the OK button to start a game or press - Channel : To view the channel list, press OK button on the remote. the EXIT button to return to the previous - If you want to record a program in the right side of the screen, you can select a program by using menu. OK button. The selected program will be reserved. - Record : Select the record ON / OFF. 4. Press the - You can also see change the timer menu. 5. Press the RED ( / or / buttons to move. ) button to undo previous move.
Calculator JPEG Menu This submenu allows you to use a calculator on 1. Use the the screen. 2. Press the OK button to dispay the picture. - You can switch between Hex (Hexadecimal) and - RED ( Dec (Decimal) basis for arithmetic with the RED ( / and / buttons to select a picture. ) : Set the time interval between slides (slideshow) ) button of the remote control unit. - Use the Numerical and the / - GREEN ( buttons ) : Slideshow - YELLOW ( on the remote control unit.
- Testing USB Speed : USB speed test. - Timeshift Rec Time : You can change default timeshift recording time. - Auto Timeshift : Set automatic timeshift On/Off. - HDD Sleep Time : HDD is change sleep mode after selected time. Status of the CAM 1. Go to Common Interface. Press OK on the CAM to see further information of the CAM. 2. Proceed with further instructions displayed on the screen, then you can check further details depending on the CAM in use.
Edit Menu The Status of the Smart Card Enter the password. Press the YELLOW button. A 1. You can access detailed information about popup menu will appear. the Smart Card using the / keys in the Main Menu to select ‘CA’ and pressing / Select the file that you want to edit, and set its . parameters as desired. 2. Proceed with further instructions displayed on 1. Normal Mode : Press the OK button on file the screen to check more detailed that you want to see a preview.
FF (Fast Forward) Bookmark When playing the file, press the FF button to forward the program (adjust the To create a bookmard/chapter at a specific playing speed). time/place of the file. - Choose from : x2, x4 and x8, x8 and x32 - RED : Press the RED button and a red triangle will appear at that position. If you want to delete the bookmarked position, press the RED button once more and the red triangle will disappear. - GREEN : Press the GREEN button to go/jump to the previous bookmark position.
Instant Recording Timer Recording 1. You can record the current channel you are watching instantly by using REC This function is available when a USB device is connected. You can choose a button. channel to record from the EPG Guide by using the REC button. If you then press the PLAY button, a time-banner will be displayed. (Refer to 6.4 EPG, 2) Timer) 2. Press the REC button once more. The following picture shows that you can select an item when you record the current channel.
PIP Start, Stop, Change PIP screen size Press (pip key) on the remote to start PIP and “Sub Channel List” will displayed. Select the channel using (OK key) Press Exit to hide Sub Channel List. Press (pip key) on the remote to change small PIP screen size. Press (pip key) on the remote to stop PIP. Sub channel list Press (pip channel list key) on the remote to display Sub Channel List. Press (exit key) on the remote to hide Sub Channel List. Swap to Channel 1.
Note. How to download / upload Channels If you want to download / upload Channels, Click on Channels in the TM loader, then select Download / Upload. There may be various reasons for the abnormal operation of a set-top box. If it does not work properly, check if according to the procedures shown in the table below. * Downloading Channels PC to TM-7100HD Series. 1. Click on Download, and then Click on Browse in the TM Loader. 2. Select the file from where you saved it. 3. Turn on the satellite receiver. 4.
1) Check if the scart is connected, 2) Check the A/V settings on your television is correct, 3) Scart cable could be faulty there fore replace of in doubt. I get the message ‘no signal’ displayed? 1) Check if the LNB cable is inserted into the IF INPUT, 2) Check if the LNB setup menu is correctly set. 3) Your satellite Dish may be out of alignment or your LNB may be is faulty. 4) Go to Easy installatin guide and start fresh, 5) Contact your dealer / installer.
Remote control USB Power supply Rear Panel connectors Code Operating condition USB Supply(Front/Rear) Power consumption Supply voltage Supply frequency TV SCART VCR SCART Option Physical Specification Video Audio L/R Component(Y/Pb/Pr) Serial data Digital tuner input X 2 Loop-through Digital tuner X 2 Terrestrial ant input Terrestrial ant output RF modulator input RF modulator output S/PDIF HDMI USB LAN Video input Audio L/R input Component input(Y/Pb/Pr) Size (W X H X D) Weight (Net) NEC-IR up to 7
INTRODUCTION 59 CONSIGNES ELEMENTAIRES DE SECURITE 59 POINTS DE CONTRÔLE AVANT L’EMPLOI 61 Nous vous remercions de nous avoir fait confiance pour l’acquisition de votre Terminal Numérique. Nous espérons qu’il vous donnera entière satisfaction durant de nombreuses années. Ce produit étant un appareil de haute technologie, il est nécessaire d’en prendre soin et de respecter les consignes élémentaires de sécurité que nous vous communiquons ci-dessous.
Ne pas installez le récepteur : A un endroit sujet à des vibrations. A la lumière du soleil directe. A l’humidité. A une température trop haute ou trop basse. ou il n y a aucune ventilation. Déplacer le récepteur d’un endroit chaud à un endroit froid provoquerq de la condensation. N’allumez pas le récepteur durant une ou deux heures, jusqu’à qu’il soit complètement sec.
Panneau Arrière 1. Power : To switch the receiver between “Standby” and “Power ON” modes. 2. Standby/Power Indicators : Red in Standby mode and no light in Power-On mode. 3. Menu : To enter or exit the Main Menu. 4. Select : To open the Channel List in non-menu mode and to select/confirm an item in menu mode. Your Digital Partner for Life 5-6. VOL( / ) : To change the volume level in non-menu mode and to modify a setting in menu mode. 7-8.
Télécommande 1. POWER : To turn the receiver On/Off. 22-23. UP & DOWN : To change channels in non menu mode and move the cursor up/down in menu mode. 2. TV/RADIO : To switch between TV and Radio modes. 24-25. LEFT & RIGHT : To change the volume level in non-menu mode. 3. MUTE : To turn the sound On/Off. 26. OK : To show the Channel List in non-menu mode and select an item or confirm in menu mode. 4. TV/SAT : To switch the TV output source between the satellite input and the UHF/VHF antenna input. 27.
Installation Satellite 4. Sélectionnez chaque menu que vous voulez éditer / changer. Raccordement avec le système A/V / antenne / TV set 1. Raccordez TV ant IN de l’appareil à l’antenne TV. 2. Raccordez vidéo et Audio de l’appareil au TV et Vidéo de la TV. Raccordez le connecteur rouge et blanc à audio R et audio L, et le jaune dans le port vidéo respectivement. 3. Raccordez votre antenne satellite. Satellite : Sélectionnez le satellite souhaité à l’aide des touches / de la télécommande.
Recherche avancée Recherche PID 1. Appuyez sur la touche menu pour faire apparaître le menu principal. 2. Utilisez les touches / et / sélectionnez dans le menu. 1. Appuyez sur la touche MENU de la télécommande pour afficher le menu principal. pour 3.Sélectionnez recherche avancée, ensuite la fenêtre suivante apparaîtra. 4. Sélectionnez chaque menu que vous voulez éditer ou changer. Satellite : A l’aide des touches / de la télécommande sélectionnez le satellite souhaité.
Sélection de programme Vous pouvez changer le programme courant par un autre programme. Dans le cas où vous voulez sélectionnez une chaîne au hasard sans savoir le nom de celle-ci, vous pouvez naviguer entre les chaînes jusqu’à ce que vous trouviez ce que vous souhaitez. Si vous connaissez le numéro de chaîne souhaitée, entrez le numéro et attendez 2 secondes jusqu’à ce que la chaîne change. Si vous connaissez le nom de la chaîne souhaitée, appuyez sur OK et la liste de chaîne apparaîtra.
EDIT CHANNELS Installation des chaînes favorites Ce sous-menu vous permet d’installer le nom préféré et les listes préférées comme vous le souhaitez. En utilisant la touche TV/Radio, vous pouvez alterner entre les modes TV et Radio. ll soutient 8 groupes favoris. Renommer ch / edit pids Se sous-memu vous permet de renommer les chaînes et entrer l’utilisateur PID. En utilisant la toche TV/Radio, vous pouvez alterner entre les modes TV/Radil.
Chaîne verrouilée Suppression de chaînes Ce sous-menu vous permet de verrouiller les chaînes. Une fois que la chaîne est verrouillée, lorsque vous essayez de la regarder ; vous devez entrer le mot de passe. En utilisant les touches TV/Radil vous pouvez alterner entre les modes TV ou Radio. En utilisant les touches SAT/FAV vous pouvez changer la liste de chaîne. Ce sous-menu vous permet de supprimer les chaînes. En utilisant les touches TV/Radio, vous pouvez alterner entre les TV/Radio.
EPG (Electronic Program Guide) Interface commune EPG (le guide électronique des programmes) CAM (modules d’accès conditionnel) Ce sous-menu vous permet de visualiser le guide électronique des programmes si il est disponible. Pour regarder les chaînes cryptées, vous avez besoin de modules d’accès conditionnel (CAM) et/ou une carte à puce d’abonnement. 1. Appuyez sur la touche EPG de la télémmande, le menu Guide Eléctronique des programmes s’affichera. 2.
TM-6902HD-T2 Super Your Digital Partner for Life TM-7102HD-T2 Super 80
