INSTALLATION MANUAL ELECTRIC SIT-STAND DESK OF-RM60 min 720mm max 1220mm 80kg (176lbs)
A (x1) B (x1) D (x2) E (x1) F (x1) G (x1) I (x1) S-A (x4) C (x2) H (x1) J (x1) S-B (x8) S-C (x4) K (x1) S-D (x2) L (x5) S-E (x8) 5mm(x1) S-F 1 F A S-A B S-F 2
2 C S-F S-B 3 S-F G 3
4 S-F S-C 5 S-E 4
E 1 2 3 E 4 E F E 5
J H K I 1 J 2-1 J 2-2 H 3 K I 8 6
9 L S-D 1 2 3 L 7
10 8
Digital Control Panel For Electric Height Adjustable Desk User Guide Plug the Power Cord into a 110v or 220v outlet IMPORTANT! You must Reset the desk prior to use: Press and hold the “ “ button on the Handset until the desk reaches its lowest height. Release the “ “ button. Press and hold the “ “ button again for about 10 seconds until the desk lowers a little bit more, slightly rises and stops. Release the “ “ button. Your desk is now ready to use.
HANDSET LOCK The handset can be locked to prevent accidental activation or movement of the desk and to prevent desk settings from being accidentally changed by children or coworkers TO LOCK: Press and hold the “ ” and” ” buttons simultaneously for 5 seconds until the LED reads “Loc”. TO UNLOCK: Press and hold the “UP” and”Down” buttons simultaneously for 5 seconds until the LED switches from “Loc” to the height display. ADVANCED SETTING Press the “ ” button for 5 seconds until the LED ashes.
4 The handset will then display the current height, and you should be able to operate the desk. 5 You may also need to do this if the desktop is ever unplugged or loses power. If the error message persists after performing the Reset procedure, contact us or local distributors to get support. DESCRIPTION CODE TROUBLESHOOTING SOLUTION Abnormal Standby Current Abnormal Power Supply Board SC0 SC1 Power on again. If the code persists, replace the Control Box Power on again.