User's Manual

Watching VCR
OWNER'S MANUAL
23
To watch VCR (When the Interface board is installed.)
Press TV/ Video button on the Remote Control and select Video Sources. (When connecting with
S-Video, select the S-Video.)
1
Insert a video tape into the VCR and press the PLAY
2
When connecting the Plasma Monitor with external equipment, match the colors of connecting ports
(Video - yellow, Audio(L) - white, Audio(R ) - red).
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of
the Plasma Monitor.
If you connect a S-VIDEO VCR to the S-VIDEO input, the picture quality will be improved,
compared to connecting aregular VCR to the Video input.
Avoid still mode on the screen for a long period of time.
<To avoid picture noise (interference), leave an adequate distance(over 3m) between the VC R and monitor.>
• No S ignal
"No S ignal" on display will disappear after 5 minutes, then the TV will go in to S leep Mode (dark).
COMPOSITE AUDIO
OUT
IN
PIP
EAR P.
EXT. SPEAKERAUDIO OUT
SPEAKER
SWITCH
+
-
+
-
S-VIDEO
CVBS
CVBS
EXT INT