User's Manual

1
2
1
2
3
4
1. Display
2. Under move key
3. Up move Key
4. Scan key, Ok key
1. Pairing
2. upload
Graphic diagram
Screen display (optional)
Upload
Pairing
Press up and down key
to enter menu mode
Charging Cradle (optional)
Terminal Setting
Enter
Enter+LF
TAB
No terminal
V4.1.2
This scanner includes wireless 2.4G, wireless and
USB transmission modes, these transmission modes
can be switched any time. When the scanner turns
on, it will automatically enter the interface detection
status, if the USB cable is connected and recognized,
the scanner will enter the wired transmission mode,
otherwise it will enter wireless transmission mode.
1. 2.4G Receiver Mode:
To enter the pairing status, first scan “2.4G
Receiver Mode”, then scan “Pairing Setting”
(the green light will flash). Now plug the USB
dongle into the device, when hearing a “beep”
sound, it means the pairing is successful and
the blue light is always on.(The whole pairing
process takes about 1min, if timeout and the
pairing failed, it will automatically exit the pairing
mode)
1. Red light is always on when charging, it turns off
when the battery is full or the charging line is not
connected. If the red light flashes, the battery may
be not applied or not applied appropriately;
2. Regular blue light indicates that all connections
are in good condition;
3. Green light flashes when under 2.4G connection;
4. Blue light flashes when under SPP connection;
5. Green&blue lights flash synchronously when
under HID connection;
Notification:
1. Please read this manual carefully before using the barcode
scanner;
2. The charging voltage of the scanner is 5V, please use a 5V/1A
power adaptor for charging to ensure that there is sufficient power
for the normal operation of scanner;
3. Our company reserves all rights, and reserves the right to make
changes to the product to improve its reliability, functionality or
design;
4. This package includes: 1 barcode scanner; 1 receiver(if Optional);
1 charging base(if Optional); 1 USB cable; 1 user’s manual;
5. Please be advised that any revision of this manual will not be
informed.
Display Power
On
Memory mode