Datasheet

ManualsBrandsTechspray ManualsAidsEco-Stencil Cleaner Wipes

Product Information

ECO-STENCIL

™

SMT Stencil Cleaner

1570 (replaces 1692)

Introduction

Effectively removes all types of solder paste (e.g. water-based, RMA, no-clean, lead-free) and

uncured adhesive from screens, misprinted boards and equipment. Completely safe on stencils,

squeegees, and equipment surfaces. Ideal replacement for IPA cleaners, which are often

prohibited because of safety and environmental restrictions on VOC’s (Volatile Organic

Compounds) or waste disposal.

One quart (with a trigger sprayer) and one gallon containers are ideal for surface and tool cleaning.

Packaging is selected to be easily recyclable. Quart labels made of recycled paper, and cartons

made of 40% recycled material.

Trigger pump on quart (1570-QT) eliminates the need for propellants, which can have a global

warming impact.

Eco-Stencil

Cleaner is fully compliant with CARB (California Air Resource Board) requirements.

Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of

Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. It does not

contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of

Very High Concern) list substances, or halides.

Features / Benefits

• Quickly Clean Paste or Uncured Adhesive

• Safe for Stencils, Tools, Misprinted Boards

• Non-Flammable

• Biodegradable

• Low VOC

• Non-Ozone Depleting

• Halide-Free – Prevents Ionic Contamination

Applications

• Manual stencil tool, work surface, and squeegee cleaning

• Automatic underside wipe stencil cleaning

• Removes unsoldered eutectic (leaded) & lead-free solder pastes

• Cleans off uncured adhesives

Application Suggestions

Stencil cleaning

Blade & tool cleaning

Adhesive cleaning (uncured) May need to soak

For Commercial Use Only

Summary of content (4 pages)

PAGE 1
Product Information ECO-STENCIL™ SMT Stencil Cleaner 1570 (replaces 1692) Introduction Effectively removes all types of solder paste (e.g. water-based, RMA, no-clean, lead-free) and uncured adhesive from screens, misprinted boards and equipment. Completely safe on stencils, squeegees, and equipment surfaces. Ideal replacement for IPA cleaners, which are often prohibited because of safety and environmental restrictions on VOC’s (Volatile Organic Compounds) or waste disposal.
PAGE 2
About TECHSPRAY RENEWTM TECHSPRAY RENEWTM is a brand that represents High Performance Eco-CleaningTM. ® Techspray has applied our expertise in solvent cleaning to formulate some of the most effective eco-friendly cleaners on the market. Performance is our top priority, using the best “green” solutions as they become available. We all are at the cusp of the ongoing movement toward sustainable products, packaging, and processes.
PAGE 3
Performance Tested according to modified MIL-PRF-29608 4.59 standards: Paste dried for 5 minutes at 212°F (100°C). Paste is applied to cleaning coupons, sprayed with cleaning fluid, allowed to sit 10-seconds, then a poly-cellulose wipe (saturated with same cleaning fluid) is dragged across one time using a dowel to maintain consistent pressure. Percentage refers to the amount of soil (by weight) removed from stainless steel test coupon. Techspray Renew Eco-Stencil Cleaner 1570 99.
PAGE 4
Packaging and Availability Eco-StencilTM Cleaner available in the following sizes: 1570-100DSP 100 count pre-saturated wipes, 6" x 8" (15cm x 20cm) 1570-QT 1 quart (0.95L) w/trigger sprayer 1570-G 1 gallon (3.8L) 1570-GX10 1 gallon (3.8L) concentrate 1 gallon (3.