Datasheet
Flux Remover G3
®
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Hand protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and
the safe working limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Eye protection
Respiratory protection :
:
:
Skin protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
PHYSICAL AND CHEMICAL PROPERTIES
Physical state
Vapour pressure
Relative density
Liquid. [Aerosol.]
1.236
122.4 kPa (917.86 mm Hg)
Ethereal. [Slight]
Odour
Clear. Colourless.
Colour
Evaporation rate
>1 (butyl acetate = 1)
Flash point
No flashpoint. ASTM D-3065 Flame Projection Test
9.
:
:
:
:
:
:
:
General information
Appearance
Important health, safety and environmental information
VOC content :
69.2 % (w/w), (855.2 g/L)
100% (v/v)
:Volatility
Hazardous decomposition
products
Conditions to avoid
May decompose if heated.
STABILITY AND REACTIVITY
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
The product is stable.
Chemical stability
10.
Reactive or incompatible with the following materials: oxidizing materials, acids and
alkalis.
:
:
:
Materials to avoid :
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Not available.
TOXICOLOGICAL INFORMATION11.
Potential acute health effects
Inhalation :
Harmful by inhalation. Possible risk of irreversible effects. Exposure to
decomposition products may cause a health hazard. Serious effects may be delayed
following exposure.
Harmful if swallowed. Possible risk of irreversible effects.
:Ingestion
Skin contact :
Harmful in contact with skin. Possible risk of irreversible effects.
Toxicokinetics
Absorption :
Distribution :
Contains material which may cause damage to the following organs: gastrointestinal
tract, cardiovascular system, upper respiratory tract, skin, eyes, central nervous
system (CNS).
Metabolism :
Not available.
Elimination :
Not available.
4/
7