User's Manual Part 2

58
PIN: On the wireless security page, enable WPS, select PIN and
enter the 8-digit PIN code from network adapter; then, within 2
minutes, enable WPS/PIN on the client device;
Note:
1. With WPS successfully enabled, the WPS LED on the router keeps
blinking for about 2 minutes, and during this time, you can
enable WPS on a wireless adapter; if the adapter successfully
joins the wireless network, the WPS LED will display a solid light.
Repeat steps above if you want to add more wireless adapters to
the router.
2. Reset OOB: Clicking this button will reset SSID to factory
default and disable security mode.
3. Existing wireless settings will still be maintained by default after
a successful WPS connection. Namely security settings and SSID
on the router will still be the same. If you want to generate a
random wireless key via WPS, click Reset OOB and then follow
WPS setup instructions above.