User's Manual Part 2

4.3 Wireless Access Control

The Access Control feature allows you to specify a list of devices to

Permit (Allow) or Forbid (Deny) a connection to your wireless

network via the devices’ MAC addresses. All other devices not

listed as Permitted will be Forbidden and vice versa.

1. MAC Address Filter: Select Permit or Forbid from the

drop-down list.

2. To permit a wireless device to connect to your wireless network,

select Permit (or Allow), enter its MAC address, click Add and

then OK. Then only this device listed as “Permitted” will be able

to connect to your wireless network; all other wireless devices

will forbidden.

Step1. Select Permit (or Allow) from the corresponding drop-down

menu.

Step2. Enter the MAC address you wish to permit in the MAC address

box and click Add.

Step3. Click OK to save your settings. You can add more wireless

MAC addresses you wish to allow.

Example: To forbid the PC at the MAC address of

C8:3A:35:C6:B3:D1 from connecting to your wireless

network, do as follows: