Trouble Shooting Guide

OPERATION

Camera

1. Follow the quick start guide to download the Bebcare iQ app and

connect the camera to your home router.

2. Make sure to switch on the WiFi of camera using the button 14 on

PU with D being shown on icon screen ( camera WiFi is default to

be ON when shipped out from factory). Follow the steps as shown in

the app.

3. Use the app to view the image as captured by camera lens.

4. Place the camera onto a stable location out of reach of baby

(preferably 1m away). When baby is newly born, you may secure the

camera onto the crib handrail using the optional crib mount as shown.

Make sure the AC adapter cord is fastened firmly to avoid

strangulation accident.

5. Adjust the microphone sensitivity (set on PU side) such that the camera

will be triggered to transmit baby’s voice whenever the microphone 4

picks up a sound at your desirable loudness level. Note this sensitivity

is independent from the sound alert sensitivity set in the app that will

activate a push notification.

6. Once the camera is switched on, the power indicator 2 will light up

green. When it is set to ultra safe mode from PU side, the indicator 2

will show pulsating green.

7. The night light 5 can be set to OFF, ON or VOX (on when detecting

sound) using the PU or app.

WARNING: When baby grows older

and able to move around in the crib, it is

strongly recommended ot remove

camera from the crib handrail to avoid

risk of cord strangulation. Place the

camera further away beyond the reach of

baby.