Trouble Shooting Guide

16
8. If the PU is paired to work with two cameras, camera 1 always has top
priority. This means while the unit is listening to signal from camera 2, in
case camera 1 starts transmitting, PU will immediately switch listening to
camera 1 until it stops to transmit, then PU will switch back to listen to
camera 2 .
9. To avoid parent missing the attendance to camera 2, while PU is listening
to signal from camera 1, in case camera 2 starts to transmit, “2” will show
flashing on icon screen to alert parent. If parent prefers to listen to
camera 2, he can short press button 10 and PU switches listening to
camera 2 while “1” go flashing (if camera 1 still transmitting). Further
press of button 10 will switch back to camera 1 again. Under such
arrangement, the parent is able to monitor both babies.
10. Under standby mode, the PU will alternately scan between the two
cameras for activities. When either one of the camera starts to transmit,
the PU will immediately listen to that camera and the icon screen will
only show information from it until the signal goes off.
11. When the PU is set to ON with vibration, whenever a baby’s voice is
detected, the vibrator starts functioning. This feature is useful when the
parent is working under noisy environment (eg. vacuum cleaning). To
save battery power, it is recommended not to use the vibrating alert
frequently.
12. Once the PU is beyond the communication range of camera for over 30
sec, an out of range alarm will be heard together with O flashing on
icon screen. Besides, the temperature reading will show - - . The alarm
will only go off when the PU falls back within the communication range of
camera.
N.B. This alarm will also be heard in case the camera is switched
off, or its power is cut off.
WARNING : no out of range alarm will be provided in case the
camera is set to operate with Ultra safe mode .
!