User Guide

CD PLAYBACK
POWER
STANDBY
OPEN
CLOSE
12
543
EX-CHANGER
DISC SKIP
MENU
PROGRAM CANCEL
SHUFFLE REPEAT
COMPACT DISC CHANGER CDC86
STEPS 1 THROUGH 5
1 & 4
2
For your reference:
Program Play
“FULL” appears on the display when the 33rd track has
been programmed (no further programming is possible).
Only track numbers actually on the disc can be
programmed.
The CDC86 will store all programs in memory even
when it is turned off.
If the unit is unplugged all programs will be cleared
from memory.
With this program play function, you can program up to 32
The unit will stop automatically when all programmed
tracks in any desired order.
tracks have finished playing, and the programmed
contents disappear from the display.
Before beginning:
Programming can be done only in the stop mode.
It is possible to program with the disc drawer open.
Programming with music skip button
If you stop playback, the programmed contents will
STEP 1. Press the program ( ) button in the stop mode.
disappear from the display, but they are still stored
in memory.
STEP 2. Select a DISC by using the DISC SKIP ( )
button.
If you press the program button twice while pro-
STEP 3. Select the desired track by using the music skip
gramming, programming will cease and change
( or )button.
into the program recall mode (see the section
below for details on recalling a program ).
Example :
Select disc 5, next select track 5.
Recalling the program
1. Press the program ( ) button.
- The first programmed track will appear on the display.
2. Press the button repeatedly if you want to check
STEP 4. Press the program ( ) button again.
the programmed contents.
- Track 5 on disc 5 has been programmed as
- Each time the button is pressed, the next program and
program No.1.
contents will appear on the display in the programmed
order.
NOTE: Repeat step 2, step 3 and step 4 to continue
programming other tracks.
3. Press the play ( ) button at any time if you want to play
the disc in the programmed order.
STEP 5. Press the play ( ) button.
- The program play will start in the programmed
order.
3
5
1 2
5
PROGRAM 05 P-01
8
DISC SKIP
PROGRAM
PROGRAM
PROGRAM