User Guide

TAPE PLAYBACK
Playback
5. To end playback :
Preparation
Press the (CLEAR/SET) button.
1. To set the cassette function:
The unit stops automatically at the end of the tape.
Switch the unit on and press the TAPE A/B button
(If necessary press the button again to select the
other deck).
Tape Counter Reset
2. To insert cassettes:
Press the COUNTER RESET button while the tape
Open cassette deck A or B or both by pushing the
is playing or stopped.
deck OPEN position. Insert one or two
During play or fast forward, the tape counter
cassettes with the tape side to the bottom and the
increases and during rewind, the tape counter
cassette side that you wish to hear facing the front
Decreases.
in cassette deck A or B.
3. Playback:
Start playback with PLAY button .
4. Fast forward or rewind :
Press button on the unit or on the remote
control for fast forward and to rewind.
TAPE RECORDING
5. To interrupt recording :
Recording from a CD, Radio or from
To interrupt the recording for a short period,
Connected Equipment
press the REC/PAUSE button again.
To continue with the recording, press the
Preparation
REC/PAUSE button one more time.
Rewind the tape to the point you want the
6. To end the recording :
recording to start.
Press the CLEAR / SET button.
You can record to cassette deck B only.
The unit stops automatically at the end of the tape.
1. To select the function you want to record :
NOTE :
Switch the unit on and select CD, TUNER,
It is recommended to use 30 or 60 minute tapes, do
AUX(TV)/VCR/DVD etc.
NOT use 90 or 120 minute tapes.
2. To insert the cassette :
Open the cassette deck B.
Insert a blank cassette into the cassette
compartment.
3. Recording mode :
Press the REC/PAUSE button.
The REC indicator will flash on the display.
4. To start recording :
Press the REC/PAUSE button or PLAY button.
19