User Guide

CLOCK SETTING
5. Press the SET button.
Example : Set to 9:25 in the morning
1. Press the CLOCK button.(If the clock is already
set, press and hold the CLOCK button for more
than 1.5 seconds)
- The hours begin to blink.
2. Select a 24 hour cycle or 12 hour cycle by
6. Set the minute with PRESET DOWN or UP
pressing the PRESET DOWN or UP button (or
button (or turn MULTI JOG).
turn MULTI JOG).
7. Press the SET button.
3. Press the SET button.
The clock starts operating.
4. Set the hour with PRESET DOWN or UP
NOTE:
button (or turn MULTI JOG).
AM 12:00 = midnight
PM 12:00 = noon
When a power interruption occurs.
The clock setting is erased, and “--:--” will flash on the
display.
CLOCK
AM
(24HR) (12HR)
or
PRESET
DOWN
TUNING
DOWN
TUNING
UP
PRESET
UP
CLEAR/SET
AM
PRESET
DOWN
TUNING
DOWN
TUNING
UP
PRESET
UP
CLEAR/SET
AM
PRESET
DOWN
TUNING
DOWN
TUNING
UP
PRESET
UP
CLEAR/SET
AM
PRESET
DOWN
TUNING
DOWN
TUNING
UP
PRESET
UP
CLEAR/SET
AM
PRESET
DOWN
TUNING
DOWN
TUNING
UP
PRESET
UP
CLEAR/SET
AM
PRESET
DOWN
TUNING
DOWN
TUNING
UP
PRESET
UP
CLEAR/SET
21
SLEEP TIMER
2. To check the remaining time until the power is
Setting the Sleep Timer
turned off.
(Set with the remote control)
While the sleep function is active press the SLEEP
button briefly. The time remaining until it turns off is
When the sleep timer is used, the power is
displayed for about 5 seconds.
automatically turned off after the specified time has
NOTE:
Elapsed.
Pressing the SLEEP button while a selected
sleep time is displayed and flashing will allow
1. To specify the amount of playback time, press
you to select a new sleep time
the SLEEP button.
“90” will appear in the display for about 5 seconds.
3. To cancel the sleep timer mode
This means that the unit turns off automatically
If you wish to stop the function press the SLEEP
after 90 minutes.
button repeatedly until 10 appears, and then
Each time the button is pressed the time interval is
press the SLEEP button once again while 10 is
reduced by 10 minutes. i.e. 80...70...etc.
displayed. This will turn off the sleep function.
Select the desired time to turn off.