Manualshelf

User Guide

ManualsBrandsTechwood ManualsOtherDVDC96
21222324252627282930
28
Selecting TV Aspect
At the SETUP screen, press to select “TV
Aspect” and press .
Press to select the desired Aspect and press
ENTER.
NOTE :
Use panscan sething for regulal TV’s
You must select the type of TV picture (aspect ratio) that corre-
sponds to the type of TV you are connecting to the DVD changer
Conventional televisions have 4:3 screen ratios. Wide-screen tele-
visions have 16:9 ratios.
If you are connecting to a conventional television, it is recommend-
ed that you select the 4:3 Panscan mode. If you are connecting to
a Wide-screen television select 16:9 Wide.
4:3 Letterbox : The video material not formatted in the Pan &
Scan style is played back in the letterbox style (black bands
appear at top and bottom of screen).
4:3 Panscan : Select when a conventional TV set is
connected. The video material formatted in the Pan & Scan style is
played back in that style (the left and right edges are cut off).
16:9 Wide : Select when a wide-screen TV set is connected.
Played in “FULL” size. (Setting the wide-screen TV to “FULL” mode
is also necessary.)
* Each screen shows an example when the video material for a
wide-screen is played.
(This setting does not affect the video material for
conventional size.)
Select the appropriate screen type according to your
TV set; conventional size screen (4:3) or wide-screen
(16:9).
16:9 Wide
4:3 Panscan
Cut Off
4:3 Letterbox