Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing. This unit does not contain any parts that can be repaired by the user.
Table of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Use Title (DVD only) The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. DVD Video (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a CD-R or CD-RW that contains audio titles or MP3 files. Notes – Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on this unit.
Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, and turn off the unit after removing the disc. Storing discs After playing, store the disc in its case.
Front Panel and Display Window STANDBY/ON indicator Lights red when the player is in Standby mode (off). PLAY ( 2 ) Starts playback. INTRODUCTION STOP ( 9 ) Stops playback. PAUSE ( ; ) Pauses playback temporarily / press repeatedly for frame-by-frame playback. DISC EXCHANGE Changes a disc (other than the one playing) during playback Remote Sensor Point the DVD Player remote control here. DISC SKIP Moves to the next available disc tray. Display window Shows the current status of the player.
Remote Control SEARCH Displays MARKER SEARCH menu. MARKER Marks any point during playback. OPEN/CLOSE Opens and closes the disc tray. POWER Switches DVD Player ON and OFF. PROGRAM Accesses or removes program menu. AUDIO • Selects an audio language (DVD) or an audio channel (CD). CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. SUBTITLE • Selects a subtitle language. ANGLE • Selects a DVD camera angle if available.
Rear Panel INTRODUCTION VIDEO OUTPUT Switch Select either S-VIDEO or COMPONENT, depending on how you connect DVD Player to the TV. S-VIDEO OUT Connect to a TV with S-Video inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y PB PR) Connect to a TV with Y PB PR inputs. VIDEO OUT Connect to a TV with video inputs. AC Power Cord Plug into the power source. OPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment.
Connections Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the player’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to optional equipment” on page 11.
Connections (Continued) Connecting to Optional Equipment Rear of DVD player PREPARATION Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cables (A).
Before Operation Repeat mode Icons General Explanation This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc.
Before Operation (Continued) Picture You can install your own Personal Preferences. TV Aspect Initial Settings General Operation 1 Press SETUP. The setup menu appears. DVD 4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Panscan: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both side of the original picture may be cut off.
Before Operation (Continued) Sound Others Digital Audio Output The DRC and Vocal settings can be changed. 4 to select the desired item and press Press 3/4 SELECT/ENTER. The setting of the selected item alternates between On and Off. Each DVD disc may have a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.
Before Operation (Continued) Parental Control Country Code Rating Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country Code List”, page 26.). Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
Operation with DVD and Audio CD Playing a DVD and Audio CD Exchanging discs during playback Playback Setup DVD CD Turn on the TV and select the video input source corresponding to the DVD player. Audio system: Turn on the audio system and select the input source connected to the DVD player. 1 Press OPEN/CLOSE to open the disc tray. your disc in the tray, with the label facing 2 Load up. When a double-sided DVD is inserted, make sure the side you want to play is facing up.
Operation with DVD and Audio CD (Continued) General Features Slow Motion DVD 1 Press SLOW t or T during playback. Moving to another TITLE DVD 1/3 When a disc has more than one title, you can select to another title as follows: Press GUI DISPLAY when playback is stopped. From the title function, press the appropriate numbered button (0-9) to select a title number. Moving to another CHAPTER/TRACK DVD CD 1/12 Search DVD CD 1 Press and hold REV . or FWD > for about two seconds during playback.
Operation with DVD and Audio CD (Continued) General Features (cont’d) Repeat CHAPT DVD TITLE Time Search CD TRACK DISC ALL OFF DVD Video Discs - Repeat Chapter/Title/Off The Time Search box shows the elapsed playing time of the current disc. 4 to select the Time 2 Within 10 seconds, press 3/4 Search icon in the on-screen display. The “-:--:--” appears in the Time Search box. The Repeat Title icon appears on the TV screen. The Repeat Off icon appears on the TV screen.
Operation with DVD and Audio CD (Continued) General Features (cont’d) Special DVD Features Marker Search Checking the contents of DVD Video discs: Menus CD MARKER SEARCH You can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER at the location you want to memorize. The Marker icon will appear on the TV screen briefly. 2 Repeat step 1 to enter up to nine Marker points on a disc.
Programmed Playback with Audio CD Programmed Playback with Audio CD Insert a Audio CD and close the tray. 1 2 Press PROGRAM while playback is stopped. The Program menu will appear. Repeat Programmed Tracks/All To repeat the track currently playing, press REPEAT. The Repeat Track icon appears on the menu screen. To repeat all tracks on the program list, press REPEAT a second time. The Repeat All icon appears on the menu screen. To cancel Repeat mode, press REPEAT a third time.
Playing an MP3 disc Notes on MP3 Discs The DVD Player can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3 recordings, read the notes on MP3 Recordings on right. About MP3 1 Insert a disc and close the tray. The menu appears on the TV screen. MP3 Program An MP3 file is audio data compressed by using the MPEG1 audio layer-3 file-coding scheme. We call files that have the “.mp3” file extension “MP3 files”.
Programmed Playback with MP3 Disc Programmed Playback with MP3 Disc Repeat Programmed Tracks/All Program allows you to store your favorite tracks for a particular disc in the player memory. To repeat the track currently playing, press REPEAT. The Repeat Track icon appears on the menu screen. Program can contain 60 tracks. To repeat all tracks on the program list, press REPEAT a second time. The Repeat All icon appears on the menu screen. Insert the disc and close the tray.
Additional Information Last Condition Memory DVD CD OPERATION This player memorizes the last condition for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled. Notes – Settings are stored in memory for use any time. – This player does not memorize settings of a disc if you switch off the player before commencing playback.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Correction Cause Symptom No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) No picture. The TV is not set to receive DVD signal output.
Language Code List Code Language Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian, Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 Malagasy 8379 Somali 6583 Assamese 7176 Galician 7773 Maori 8381 Albanian 6588 Aymara 7178 Guarani 7775 Macedonian 8382
Country Code List Enter the appropriate code number for the initial setting “Country Code” (See page 15).
Specifications Power requirements AC 120V , 60 Hz Power consumption 16W Dimensions (approx.) 430 X 118 X 408 mm (16.9 x 4.7 x 16.1 inches) (w x h x d) Mass (approx.) 5.7 kg (12.
ONE-YEAR LIMITED WARRANTY WHO PROVIDES WARRANTY This warranty is provided by W elton Sound Systems U.S.A. LTD. WHO IS PROTECTED This warranty is extended to the first original owner. NOTE: RENT-TO-OWN DEALERS ARE CONSIDERED TO BE THE FIRST ORI GINAL OWNER WHAT IS COVERED AND HOW LONG This warranty covers the electronics -including electronic parts, electronic circuit assembl ies and electronic mechanical assembli es - from date of origi nal purchase.
