User Guide

P
S
C
A
N
7
PREPARATION
CONNECTING COMPONENTS
You must connect a TV to the receiver in order to use the
receiver’s DVD player. You can connect other audio and audio/
visual components to the receiver in order to use the Home
Theater Audio System’s surround sound capabilities.
Speaker Terminals — Use the color-coded wires (supplied) to connect each
speaker to the appropriate terminal.
Note: Be sure to connect the black wires to the black terminals, and the
red wires to the other terminals.
DIGITAL OUT — To connect a Toslink optical cable
if you have a digital audio component such as a
MD,DAT or CD recorder.
See "Connecting a Digital (Optical) Audio
Component" on Page 8).
SAT IN — To your
satellite receiver
or cable box’s
digital audio out-
put jack (see
“Connecting a
Digital (Optical)
Audio Component”
on Page 8).
To your cassette deck’s IN and OUT jacks
(see “Connecting a Cassette Deck”).
To your TV’s audio OUT jacks
(see “Connecting a TV”).
DVD/TV
Connection
Option 2
(see below)
To your VCR’s IN and OUT
audio jacks (see “Connect-
ing a VCR” on Page 8).
To your satellite
receiver or cable
box’s analog audio
IN and OUT jacks
(see “Connecting
a Satellite Receiv-
er or Cable Box”
on Page 8).
To an auxiliary analog
component's audio out
jacks (see “Connecting
an Auxiliary Audio
Component on Page 8").
To your VCR’s IN and
OUT video jacks (see
“Connecting a VCR”
on Page 8).
To your satellite re-
ceiver or cable
box’s analog video
OUT jack (see
“Connecting a Sat-
ellite Receiver or
Cable Box” on
Page 8).
Connect a subwo-
ofer here (see
“Connecting a Sub
Woofer” on
Page 8).
Connect AM and FM antennas
here (see page 8).
CONNECTING A TV
Use RCA type audio cables to connect from the TV’s
Audio Out jacks, to the DVR100’s TV In jacks. Connect
Red to Red and White to White.
FOR DVD VIDEO PLAYBACK:
OPTION 1: If your TV has Component Video jacks,
connect to the Component Video Out jacks on the rear
of the DVR100 using a three wire (R,G,B) component
video cable. (This option will give the highest picture
playback quality available.)
DVD/TV
Connection
Option 1
(see below)
DVD/VCR/TV
Connection
Option 3
(see below)
OPTION 2: If your TV has an S-Video jack, connect
to the [DVD] S-video Out jack on the rear of the DVR100.
OPTION 3: If your TV only has a Composite Video
jack (RCA Type Jack) use a single RCA type coaxial cable
(yellow plug) and connect to the [DVD] Monitor Out jack
on the rear of the DVR100.
FOR VCR, SATELLITE OR CABLE BOX VIDEO PLAYBACK:
The [DVD] Monitor Out jack on the DVR100 MUST be con-
nected to the TV using a single RCA Type coaxial cable
(yellow plug). Or you can connect the VCR, Satellite or cable
box video output directly to the TV if the TV is equipped with
more than one video input.
P-SCAN