User Guide

ManualsBrandsTechwood ManualsOtherDVR100

USING THE TUNER

1. Press

POWER

. The receiver defaults to the last selected

function.

2. Rotate

FUNCTION

knob until the TUNER function appears.

3. Press

BAND AM FM

AM FM.

to select the desired band ( or ).

4. Press the TUNING MODE button on the front of the DVR100

until tuning appears in the display, then press the

TUNING/

PRESET or buttons on the front of the DVR100

or on the remote repeatedly until the desired station appears

in the display. NOTE : Pressing for about a second and re-

leasing the TUNING/PRESET or buttons activ-

ates the auto tuning function allowing the tuner to automa-

tically scan to the next clear station. Pressing the TUNING/

PRESET or for less than a half second chan-

ges the frequency by one step.

Listening To FM Stereo Broadcasts

In FM mode, press the STEREO button on the front of the

DVR100 until ST appears to the right of Tuned.

When you listen to very weak FM stereo stations, you might

hear higher-than-normal background hiss. Switching to

mono (no ST indicator) may eliminate the hiss.

Presetting Radio Stations

You can preset up to 30 AM and 30 FM stations regardless of

the reception. Tune in the desired stations using auto or

manual tuning.

Manual Preset

To memorize a station press the TUNING MODE button

until TUNING appears in the display, then press the

TUNING/PRESET or buttons on the front of

the DVR100 or on the remote repeatedly until the desired

station appears in the display. Press the MEMORY but-

ton on the front of the DVR100 or on the remote and MEMO

will appear and flash in the display for 5 seconds. While

MEMO is flashing in the display select a preset number by

pressing the TUNING/PRESET or buttons on

the front of the DVR100 or on the remote then press the

MEMORY button again to store the station. Repeat this

step to store additional stations.

NOTE: You can store up 30 stations for each band.

Auto Preset

1. Press

BAND

to select or

2. Hold down

MEMORY

button for about 3 seconds.

3. The tuner automatically begins scanning, and stores the

first 30 strong signals it receives.

4. Scanning stops automatically after radio stations are stored

in the auto preset memory.

: :

: Press

MEMORY

again to interrupt auto scanning.

To store stations on the other band, repeat Steps 1–4,

substituting the other band in Step 1.

Listening to Preset Stations

To listen to a radio station stored in the station memory,

press the

TUNING/PRESET

or to go to the

Switching Between Preset Stations and

Manual Tuning

If you store preset stations, pressing

TUNING/PRESET or

scrolls through the preset stations, rather than changing

the frequency station by station.

To switch to scrolling by individual stations, press the

TUNING

until TUNING appears in the display. Then,

TUNING/PRESET

or buttons to change

the frequency by one step. Or hold down

TUNING/

PRESET

buttons to tune to the next clear station.

To switch back to scrolling through the preset stations, press

TUNING MODE

, until PRESET appears in the display. Then,

TUNING/PRESET

press the buttons until you

USING THE CD PLAYER

You can use the receiver’s 3-DVD changer to listen to audio

CDs.

: You can only use audio CDs with the receiver.

CD-ROM, CD-G, photo CD, and CD-i discs cannot be

played on this player.

1. Press

POWER

. The last selected function appears.

2. Rotate

FUNCTION DVD/CD

until appears.

3. Press

drawer.

DISC1

DISC2

, or

DISC3

to open the desired

desired preset station.

MODE button

press the

reach the desired preset station.