User Guide

ManualsBrandsTechwood ManualsOtherDVR100

DVD PLAYER OPERATION

If you leave the disc tray open for more than 8 minutes,

the disc tray automatically closes.

If you leave the disc tray open, the disc tray automatically

closes when the function mode is changed.

If you close the tray by pressing

DIS C 1

DIS C 2

DIS C 3

, the receiver does not load the disc. Press the

proper P L AY

key to load the disc.

After playing back all of the chapters in the title, the

DVD player automatically stops and returns to the menu

screen.

• Do not move the DVD player during playback. Doing so

might damage the disc and the receiver.

• Use

on the main unit to

open or close the disc trays.

Do not push the disc tray while it is moving.

Doing so may cause the DVD player to malfunction.

• Do not push on the disc tray or put any objects other than

discs on the disc tray. Doing so may cause the DVD player

to malfunction.

• Keep your fingers well clear of the disc tray as it is closing.

Keep children’s fingers away from the closing disc tray as

there is a risk of personal injury.

• If the inhibit icon " "appears on the TV screen when

a button is pressed, it means the function is not available on

the disc you are playing.

• Depending on the DVD disc, some operations may be

different or restricted. Refer to the jacket or case of the disc

you are playing.

Stopping Play

: :

• The resume option works only with discs for which the

elapsed playing time appears on the window display

during playback.

• Opening the disc tray cancels the resume option.

• The resume option may not be available on some DVD

discs.

Pausing Play

Press the receiver’s or the remote’s button.

PAUSE

Advancing by Frames

Press the receiver’s or the remote’s button while the

DVD is paused. Each time you press the receiver’s or the

remote's button the picture advances one frame.

To resume normal playback, press the receiver’s proper

PLAY

button or the remote’s

PAUSE

DIS C1

DIS C2

, or

DIS C3

DIS C 1

DIS C 2

DIS C 3

To resume normal playback, press the receiver’s proper

PLAY

button or the remote’s

DIS C 1

DIS C 2

or button.

DIS C 3

BASIC OPERATION

1. Press the POWER button. The last selected function

appears in the display.

2. Rotate the receiver’s FUNCTION knob, or from the remote

control press DVD/CD, until DVD/CD appears on the display.

Note: If the DVD/CD function is selected using the function

knob on the front of receiver, the DVD/CD button must be

pressed on the remote control in order for remote DVD/CD

functions to operate.

3. Press to open the desired disc

tray. Open appears and the corresponding disc indicator (1,

2 or 3) flashes.

4. Place a disc on the open tray with the playback side down.

Make sure that the disc is properly seated on the tray. Failure

to do so may cause damage to the disc or to the DVD/CD

player.

5. Press the receiver’s proper PLAY button or the remote control’s

or play button. The disc tray

closes and the receiver loads the disc and starts playback.

6. When the DVD’s menu screen appears on your TV screen press

the remote’s to select the Play Movie option. Then, press

the receiver or remote's or play

button to begin DVD playback.

Notes: The disc indicators light even if there is no disc in the

tray. The unit checks the tray after you press the receiver or

remote's or play button.

Only the indicators for trays that have disc’s remain lit.

DIS C1

DIS C2 DIS C3

DIS C1

DIS C2 DIS C3

DIS C1

DIS C2 DIS C3

DIS C1

DIS C2

DIS C3

To stop DVD playback press the STOP button twice on

the receiver or on the remote control. Pressing the S TOP

button once will pause the DVD playback. (Resume appears

in the receiver’s display and DVD video is interrupted on

the TV.) To resume playback, press the appropriate

or play button on the remote

control or on the DVR100 receiver.

DIS C1

DIS C2 DIS C3

button.