DVR-120 VCR/DVD Digital Home Theater Receiver OWNER'S MANUAL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions CAUTION: < Read all of these Instructions. < Save these Instructions for later use. < Follow all Warnings and Instructions marked on the audio equipment. 1)Read Instructions — All the safety and operating instructions should be read before the product is operated. 2)Retain Instructions — The safety and operating instructions should be retained for future reference. 3)Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.
For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents INTRODUCTION VCR PART Contents...................................................................................4 Before Use .............................................................................5 Discs.........................................................................................6 Remote Control Unit ............................................................10 Connection ............................................................................
Before Use “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc. All rights reserved. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Before Use Discs 1 DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc or the unit. Type of Discs That Can be Played on This System WHEN MOVING THIS UNIT When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc tray to its closed position in the player. Then, press the power switch to turn the power off, and disconnect the power cord.
Discs 2 Note 3 The audio on a DVD disc recorded in MPEG version 2.0 format cannot be played (MPEG-2 is an image only format). Note 4 File names of MP3 should be alphanumeric characters. This unit cannot display symbols and fullsize or 2 bytes-wide characters (such as Japanese, Chinese, etc.) correctly. Also, be sure to use the extension ".mp3". When more than 200 MP3 files are recorded on the disc, the unit might not be able to play it correctly.
Discs 3 Example of Icons used on DVD discs: number of audio tracks recorded on the disc number of subtitles recorded on the disc screen aspect ratio disc recorded with multiple camera angles region code DVD Title 1 Titre 1 Titulo 1 Chapter 1 Chapitre 1 Capitulo 1 Glossary of Disc Terms Title 2 Titre 2 Titulo 2 Chapter 2 Chapitre 2 Capitulo 2 Chapter 1 Chapitre 1 Capitulo 1 Chapter 2 Chapitre 2 Capitulo 2 CD Track 1 Piste 1 Pista 1 Track 2 Piste 2 Pista 2 Track 3 Piste 3 Pista 3 Track 4 Piste 4 Pis
Notes on Discs A This section shows you how to handle, clean, and store discs. < Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.) < To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
Remote Control Unit Remote Control Operation Range The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the unit. < Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.
Connection 1 TV ANTENNA INPUT COMPONENT/PROGRESSIVE SCAN VIDEO OUT AUDIO INPUT Pr Antenna Cable TV Wall Jack A B Pb VIDEO INPUT S-VIDEO INPUT Y C REAR PANEL OR Antenna Flat Wire (300 ohm) 300/75 ohm Adaptor (Not supplied) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. The connections are listed in order of quality of picture with the best possible last.
Connection 2 You can ONLY watch and listen to DVD playback through TV COMPONENT/PROGRESSIVE SCAN VIDEO OUT AUDIO INPUT Pr Pb E VIDEO INPUT the connections shown below. S-VIDEO INPUT A Audio/Video connection Y Connect the VIDEO OUT. MONITOR jack on the DVD/VCR to the video in jack on the TV using the video cable supplied B . B D B DVD S-Video connection Connect the VIDEO OUT. DVD S-VIDEO jack on the DVD/VCR to the S-VIDEO INPUT on the TV using the SVideo cable D .
Connection 3 A DIGITAL IN jacks GAME DEVICE HDTV RECEIVER DIGITAL OUT OR REAR PANEL < If the Accessory Component is provided with a DIGITAL OUTPUT jack, connect it to the DIGITAL IN jack on the DVD/VCR. (Use the optional coaxial cord or optical fiber cable.) < Connect any one of the DIGITAL IN terminals. < When an optical fiber cable is used for connection, remove the caps protecting both ends of the optical cable and the connectors.
Connection 4 TV AUDIO INPUT COMPONENT/PROGRESSIVE SCAN VIDEO OUT Pr Pb VIDEO INPUT S-VIDEO INPUT Y A AUDIO IN/OUT jacks (AV2 AUDIO) Analog 2-channel audio signal is input or output from these jacks. Connect the component with an RCA pin cable. Make sure to connect : white plug q white jack (L: left channel) red plug q red jack (R: right channel) < If you don't have speakers and want to hear sound from a TV, connect AV2 AUDIO OUT jacks to the LINE IN jacks of TV.
Connection 5 Speaker Connections REAR SPEAKER REAR SPEAKER FRONT SPEAKER FRONT SPEAKER Caution: To avoid damaging the speakers with a sudden highlevel signal, be sure to switch the power off before connecting the speakers. Check the impedance of your speakers. Connect speakers with an impedance of 6 ohms or more. The red speaker terminals are + (positive), and the black terminals are - (negative). The + side of the speaker cable is marked to make it distinguishable from the - side of the cable.
Hints on Speaker Placement To achieve the best possible surround, install your speakers as shown below. Be sure all speakers are installed securely to prevent accidents and to improve sound quality. B D A Speakers are usually designed with a partcular placement in mind. Some are designed to be floorstanding, while others should be placed on stands to sound their best. Some should be placed near a wall, others should be placed away from walls.
1 Connecting Antennas 2 A AM Indoor Loop Antenna The high-performance AM loop antenna provided with this unit is sufficient for good reception in most areas. B A BLACK WHITE To stand the loop antenna on a surface, fix the claw to the slot. Connect the loop antenna's wires to the AM antenna terminals as shown. (Connect the white wire to the right terminal, and the black wire to the left terminal.) Place the antenna on a shelf, for example, or hang it on a window frame, etc.
Names of Each Control 1 1 18 2 17 16 15 14 3 13 11 10 9 8 7 6 12 4 5 Front Panel Overview 1 DVD OPEN/ CLOSE 2 DISC TRAY (DVD DECK) 3 Cassette compartment (VCR DECK) 4 VCR EJECT 5 VOLUME 6 PLAY 7 STOP 8 PAUSE 9 CHANNELb/5 10 COPY REC 12 Display Window 13 Remote Sensor 14 SURROUND 15 FUNCTION 16 SKIP/ TUNING 17 VIDEO IN / AUDIO IN Connect the audio/video output of an external source (Audio system, TV/Monitor Auother VCR) 18 POWER 11 18
Names of Each Control 2 1 2 3 20 4 5 DVD SLEEP MUTE TITLE TRK 6 7 CHP SLP 8 9 Tuned ALL 10 11 12 13 PRESET VCR HI-FI VCD MP3 DVD RA. PRGM STEREO 26 25 P.SCAN DIGITAL EX 24 23 22 21 ANALOG 19 18 SAP COPY REC 17 16 15 14 Front Panel Display 1 2 3 4 5 6 7 8 9 Indicates when the DVD FUNCTION is on. SLEEP timer indicator. MUTE. Indicates current title number. Indicates current track number. Indicates current chapter number. SLP(SP) indicates recording and playback speed.
Names of Each Control 3 CABLE : Find your CABLE code(see page 73). Press TV button and your CABLE code.(correct input: : LAMP LED blinks twice). SAT : Find your SAT code(see page 73). Press TV button and your SAT code.(correct input: : LAMP LED blinks twice). 3 Direct Channel Selection Buttons (0-9) Allows direct access to any channel.. 4 100k. Press to select a channel over 99. 5 CH TRACKING . Press to select a channel for viewing or recording.
Names of Each Control 4 - Sets the tape speed for recording. 25 BACKWARD( . ). DVD : Search backward , go to beginning of current chapter or track or go to previous chapter or track. VCR : In the Stop mode, this button rapidly winds the tape backwards. In the Play mode, this button activates reverse search. FORWARD( / ). DVD : Search forward , go to next chapter or track. In the Stop mode, this button rapidly winds the tape forward. In the Play mode, this button activates forward search. 26 t(PLAY) .
Names of Each Control 5 1 2 10 5 6 7 8 3 9 4 11 Rear Panel Jacks 1 AC POWER Cord. Plug into the power source 2 RF ANTENNA RF OUT (TO TV) : Connect to a TV with an RF coaxial input. RF IN (FROM ANT.) : Connect the UHF/VHF/CATV antenna to this terminal. 3 FM ANTENNA CONNECTORS Connect the FM antenna to this terminal. AM ANTENNA CONNECTORS Connect the AM antenna to this terminal 4 DIGTAL AUDIO IN (OPTICAL) Connect to the digital audio output of an external digital device.
DVD DVD Settings 1 DVD SETUP This chapter describes how to use the DVD SETUP menu. Most settings and adjustments are required to be set when you first use the system. Using the DVD SETUP menu, you can adjust the picture size, set a language for the OSD (on screen displays), limit playback by children, etc. D V D P A R T AV 1 INP MAKE SURE YOUR TV IS CONNECTED TO THE DVD PLAYER AND TURNED ON. SET UP USES ON-SCREEN MENUS TO PROGRAM.
DVD DVD Settings 2 D V D P A R T A Selecting the OSD Menu Languages DVD SETUP Sub - title OFF TV Type 4:3/PS TV System NTSC Video Output S-Video You can select the language for OSD (On Screen Display). This setting allows you select a preferred language for the DVD SETUP menu operating messages and sound track language. The default language is ENGLISH. If you change the OSD Language while DVD DISK is in the DVD/VCR, the language will change after the DVD door is opened and closed.
DVD DVD Settings 3 E TV System DVD SETUP Sub - title TV Type OFF 4:3/PS TV System NTSC Video Output S-Video You may need to change the color system to match your TV. Most TVs in the United Sates and Canada use the NTSC color system. If your television should happen to use PAL or MULTI, you need to change this setting. D V D P A R T MULTI : Select MULTI when a MULTI TV is connected. PAL : Select PAL when a PAL TV is connected. NTSC: Select NTSC When a NTSC TV is connected.
AUDIO Surround Mode D V D P A R T Selecting the Surround Mode 1 AUDIO SETUP Surround Mode OFF SPEAKER Night Mode OFF You can select the surround mode in the AUDIO SETUP menu, and by pressing the SURR(SURROUND) button. Each time the SURR.(SURROUND) button is pressed, the surround mode is changed as follows : < Select the appropriate surround mode according to the program source. < When you press the SURR. button, the sound is cut off for a moment.
AUDIO Speaker Configuration 1 This unit provides connections for five full range speakers and one subwoofer speaker.
AUDIO D V D Speaker Configuration 2 Changing the Speaker Distance 1 When you have arranged your home theater(speakers, receiver, and any components). You can change the speaker distance entered in the receiver's memory. P A R T 1 Press the SETUP button on the remote control. 2 Select AUDIO Setup and press the ENTER button. 2 3 Press the b button to select SPEAKER and press the SETUP Set Language ENTER button.
AV 1 AUDIO Speaker Configuration 3 VOLUME SP LEVEL REC INPUT COPY D Balancing relative volume between V D speakers using SP LEVEL P A R T The SP LEVEL function is useful to adjust the relative volume between speakers. Once the balance is set, you don't have to change the balance as long as the speakers aren't moved. < It is also possible to adjust the relative volume during playback of DVD. < Use the remote control from your listening position. 1 1 Press the SP LEVEL button.
AUDIO Night Mode D V D (Dynamic Range Compression) In many listening situations, you may find loud passages objectionable. Adjusting this setting allows you to compress the sounds into a range that you may find more suitable for a particular listening situation. "U Digital" satisfies these needs through the dynamic range control. Select one of the following to fit the individual listening situation of the audience.
LOCK Setting a Rating Level and Password How to use the Lock. SETUP Set Language English DVD Setup Audio Setup Lock You can prohibit the playing of specified DVDs which are unsuitable for children. Some DVD discs contain a restriction level which enables parents to remove scenes or prevent playback of discs by children. Your DVD player has a password device designed to prevent children from changing the level.
Basic Operation D V D A A Tone Control 1. Press the BASS/TRE button to select "BASS" or "TRE (treble)". Each time the TONE button is pressed, the mode is changed as follows : P A R T BASS TRE OFF To adjust the level of low frequency sound range, select "BASS". To adjust the level of high frequency sound range, select "TRE (treble)". 2. Press the 5,bbuttons of the remote control unit to change the setting. The level can be adjusted in 2 dB steps from -6 to +6.
CD/MP3 Playback MP3 .. 001 002 003 004 005 006 007 ROOT 001 DIR 002 DIR DIR 003 MP3 When a MP3 disc is loaded, the recorded directories will be shown on the left side of the screen. Select a directory by pressing the 5 / b /g / t buttons and press the ENTER or PLAY(y) button. A list of track numbers and titles(file names) will be shown on the right side of the screen. Select a track and press the ENTER button or the PLAY button. Playback will start from the selected track.
DVD D V D P A R T Resume Playback To stop and resume playback of DVD If you press the STOP button during playback of DVD, "RESUME" briefly appears on the screen, and the unit enters RESUME mode. If you want to cancel the RESUME mode and stop playback completely, press the STOP button again. How to resume playback During playback of DVD, press the STOP button at the point where you want to interrupt playback. "RESUME" briefly appears on the screen, and the time counter on the front panel display stops.
DVD/CD/MP3 Playback from a specific chapter/track To skip to a specific chapter/track TUNING During playback, press the SKIP button(.or/) repeatedly until the desired chapter or track is found. The selected chapter/track will be played from the beginning. When the . button is pressed during playback of a CD, the track being played will be played from the beginning. To return to the beginning of the previous track, press the . button twice.
DVD Slow-Motion Playback D V D DVD only To play a disc in slow-motion, press the SLOW buttons during playback. P A R T +SLOW : slow forward playback(+SLOW 1/2, 1/4, 1/8) -SLOW : slow reverse playback(-SLOW 1/2, 1/4, 1/8) Each time the SLOW button is pressed, the speed is changed. To resume normal playback, press the PLAY button (y). < The sound is muted during slow-motion playback. < Subtitles don't appear on the screen during slowmotion playback. < This function is not available for CD and MP3.
DVD/CD/MP3 Repeat Playback Repeat Playback of DVD Each time the REPEAT button is pressed during playback, the mode is changed as follows : A A CHAPTER REPEAT ON TITLE REPEAT ON REPEAT OFF Chapter Repeat The chapter being played will be played repeatedly. If you select another chapter in CHAPTER REPEAT mode, the chapter you selected will be played repeatedly. < REPEAT indicator lights, and "CHP" blinks on the front panel display.
CD Shuffle Playback of CD, MP3 D V D P A R T Tracks of a disc can be played randomly. 1 1 Press the RANDOM button in the stop mode. "RANDOM ON" appears on the screen. 2 Press the PLAY button (y) to start shuffle playback. INDEX < If you press the / button during shuffle playback, the next track will be randomly selected and played. A track cannot be replayed during shuffle playback. 3 To stop shuffle playback, press the RANDOM button. "RANDOM ON" appears on the screen.
CD Programmed Playback (CD) 1 Up to 32 tracks can be programmed in the desired order. Note that the total time of the programmed tracks cannot exceed "99 minutes 59 seconds". 1 Press the PROGRAM button in the stop mode. "PRGM" lights on the front panel display. DVD SLEEP MUTE TITLE TRK CHP SLP Tuned ALL AB PRESET VCR D V D P A R T HI-FI CD MP3 DVD R. PRGM STEREO P.SCAN 5 3 SETREO EX DIGITAL ANALOG SAP COPY REC program number 2 2 Press the numeric button to select a track.
CD D V D P A R T Programmed Playback (CD) 2 Checking the programmed content In the stop mode, press the 5/b buttons repeatedly. Track number, program number and the total playback time is displayed in order. How to delete tracks from a program In the stop mode, press the 5/b buttons repeatedly until the programmed track to be deleted is displayed. Then press the CLEAR button. The selected track is deleted from the program and the track programmed next is moved to take its place and shown on the display.
GUI D V D CD P A R T 01 A B DVD 01 35 C D TIME 1:15:20 AUDIO 1 ENG ENG 1/1 E F G H Abc GUI (Graphical User Interface) If you press the GUI button during playback, specific information will appear on the screen. A current track number B elapsed time of the track C current title number D current chapter number E elapsed time of the title F sound track Language and sound system.
GUI D V D Title Select DVD Title Select (DVD only) 1 Press the GUI button. P A R T The current title number will be highlighted. 2 Within 5 seconds, select a title number by pressing 1, 2, 3 ENTER GUI the numeric buttons. EXAMPLE : To select title No. 3 3 Press the ENTER button. Playback starts from the selected title. < If you select titles which don't exist on the disc, the PROHIBIT icon A will be displayed. Chapter/Track Select (DVD/CD) 1 Press the GUI button during playback.
GUI Picture Zoom DVD Zoom allows you to zoom in and enlarge the picture on the screen to either 2 times(x2) or 4 times(x4) or 16 times (x16) or normal size. To zoom the picture, press the ZOOM button during playback. Each time the ZOOM button is pressed, the magnification level changes from x2, to x4, to x16, to off D V D P A R T < You can shift the zoom point by pressing the 5/b/g /t buttons during zoom playback. < Zooming does not work on subtitles or menu screens.
GUI D V D Select a Subtitle Language To select a subtitle language, press the SUBTITLE button during playback. Each time you press the SUBTITLE button, the subtitle languages included on the disc appear on the display. DVD P A R T Abc 1 ENG Number of subtitle 1, 2, 3... :Number of language Kind of subtitle < The default subtitle value is "OFF". < It may take a few seconds untill a selected subtitle appears on the screen. < When no subtitles are recorded on the disc, "OFF" will be displayed.
Tuner FM/AM 1 Select TUNER by pressing the FUNCTION button 4 1 repeatedly (or press the FM/AM button of the remote control unit). Make sure the antenna(s) have been connected (see page 17). 3 2 3 2 Select AM or FM by pressing the FM/AM button FUNCTION FUNCTION repeatedly. 1 D V D P A R T 3 If "PRESET" indicator is lit, press the TUNING MODE FUNCTION button to select the manual tuning mode. The "PRESET" indicator disappears from the display. This button is used to change the tuning mode.
Preset Tuning D V D Preset Tuning You can store FM/AM stations from Channel 1 to 30 respectively. P A R T Automatic Memory Presetting 1 2 1 Select FM/AM by pressing the FUNCTION button repeatedly (or press the FM/AM button of the remote control unit). 2 Press the PRGM button for more than 2 second. Up to 30 of the best received stations in your area will be stored automatically. Then you can select each stations easily. 3 You can select each station by pressing CH UP/DOWN buttons.
VCR Menu Screen Operation VCR button 1. Turn on the TV and DVD/VCR. MENU button Direction buttons 3. Set the DVD/VCR to VCR mode by pressing the VCR button on the remote control if the VCR indicator is not on the display panel.(When you insert the tape into the VCR deck, the DVD/VCR will automatically be placed in VCR mode.) VCR MENU CLOCK SET TIMER RECORDINGS CH SET INITIAL SET LANGUAGE MOVE: SELECT: A 2.
Setting the Clock Manually < If you cannot set the DVD/VCR using Auto Clock, set the clock manually as follows : Numeric buttons MENU button Direction buttons V C R < This clock is based on a 12-hour digital display. The clock not only serves as a digital display of your current local time, but is essential to the successful operation of the VCR's Programmable Timer Recording used for unattended recording. Therefore it is of the utmost importance that the clock be set accurately.
Channel Setting 1 < Press the MENU button, then VCR MENU screen will appear. < Select the 'CH SET' menu by pressing the b/5buttons, then press the t button. < 'CH SET' menu screen will appear. Numeric button MENU button Direction buttons V C R (VCR MENU SCREEN) A TV/CATV MODE SELECTION VCR MENU Press the t button, then TV(CATV) mode will be changed to the CATV(TV) mode.
Channel Setting 2 C MOVE: V C R C TO SET A CHANNEL MANUALLY(CHANNEL CH SET TV/CATV AUTO CHANNEL SEARCH ADD/REMOVE CHANNELS 1 SELECT: EXIT: ADD/REMOVE CHANNELS ADD: 2 REMOVE: 1 Select the 'ADD/REMOVE CHANNELS' menu by 5buttons, then press the t button. pressing the b/5 Select a channel No. to add or erase by pressing the b /5 5 buttons or the channel direct access CHb buttons. (Press 0 and 7) Example : To set channel 7.
"INITIAL SET" Menu 1 < Press the MENU button, then VCR MENU screen will appear. < Select the 'INITIAL SET' menu by pressing the b/5buttons, then press the t button. < 'INITIAL SET' menu screen will appear. (VCR MENU SCREEN) VCR MENU CLOCK SET TIMER RECORDINGS CH SET INITIAL SET LANGUAGE MOVE: SELECT: A TAPE (Recording/Playback Time of video Tape) Press the t button to choose the type of video cassete.
"INITIAL SET" Menu 2 E TAPE REPEAT PLAY AUTO CLOCK STANDARD TIME DAYLIGHT SAVING TIME MOVE: OFF V C R E SETTING DAYLIGHT SAVINGS TIME(DST) INITIAL SET SELECT: EXIT: ON AUTO P A R T Daylight Savings Time(DST) can be set automatically, or manually as follows: 1. In the 'INITIAL SET' menu, select the 'DAYLIGHT SAVINGS TIME' menu by pressing the b /5 buttons. 2. Repeatedly press the tbutton to cycle through the Daylight savings Time options.
Video Cassette 1 A LOADING A LOADING 1 < Push the cassette into the cassette compartment 1 smoothly with label up. < If the power is off prior to loading the tape, loading the tape will turn the power on automatically if the AC power cord is plugged in. < Insert the tape into the VCR deck. The DVD/VCR will automatically be placed in VCR mode. 2 The TAPE IN indicator is on. 2 B UNLOADING 1 Press the H(STOP) button on the remote control or UNLOADING B 1 the front panel.
Video Cassette 2 C C CASSETTE FORWARDING DIRECTION (BEGINNING) Note: < Keep cassettes away from direct sunlight, heat or extreme cold. < Avoid extreme humidity, violent vibrations or shocks, strong magnetic fields (near a motor, transformer or magnet) and dusty places. < Store cassettes vertically in their protective cases at normal room temperature. PLAY (ENDING) V C R P A R T D D TYPES OF VIDEO CASSETTE Use tape with the VHS mark in this unit.
AV 1 INPUT TUNING FUNCTION SURROUND REC COPY CHANNEL Basic Playback 2 6 7 5 4 < Turn on the TV and DVD/VCR. < Tune the TV to the channel that receives the DVD/VCR signal (usually channels 3, 4 or the video input ). < Set the DVD/VCR to VCR mode by pressing the VCR button on the remote control if the VCR indicator is not on the front panel display.
Special Operation CHANNEL 4 TUNING MODE buttons CH/FREQ buttons 2 1 CHANNEL CHANNEL V C R 1 P A R T 2 REC COPY 4 TUNING TUNING CHANNEL 3 1 2 1 TO VISUALLY SEARCH FORWARD (CUE) Press the / button once in the PLAYBACK mode. The tape will advance rapidly with picture, and the CUE indicator will blink on the display panel. When pressed once more, the tape speed will increase. 2 TO VISUALLY SEARCH REVERSE (REVIEW) Press the . button once in the PLAYBACK mode.
Digital Shuttle Function Various speeds can be selected by pressing the SHUTTLE (+,-) buttons on the remote control.
Recording TV Programs 1 FM/AM 1 PREPARATION < Turn on the TV and DVD/VCR. < Tune the TV to the channel that receives the DVD/VCR signal (usually channels 3,4 or the video input ). 3 4 TV/VCR V C R AV 1 INPUT TUNING FUNCTION SURROUND P A R T REC COPY CHANNEL 5 INDEX 3 VCR MODE Set the DVD/VCR to the VCR mode by pressing the VCR button on the remote control.This is only needed if the VCR indicator is not displayed on the front panel.
Recording TV Programs 2 6 RECORDING Press the REC button and recording will start.(The REC indicator appears) FM/AM TV/VCR TV/VCR button CHANNEL 6 8 7 7 TO STOP RECORDING TEMPORARILY < Press the J button to avoid recording unwanted material. Press the REC button to continue the recording. < The pause function will be released after 5 minutes to prevent damage to the tape or the DVD/VCR, and then the STOP mode will be automatically entered.
PY COPY PY AV 1 INPUT TUNING FUNCTION SURROUND REC A COPY Duplicating a Video tape CHANNEL Front of DVD/VCR AV 1 "VIDEO OUT" INPUT "VIDEO IN" A DVD/VCR TO VCR CONNECTION If you connect the DVD/VCR to another VCR, you can duplicate a previously recorded tape. "AUDIO IN" "AUDIO OUT" V C R P A R T B OPERATION 1 B OPERATION 1 Load a blank cassette tape with the safety tab intact into the Recording DVD/VCR.
One Touch Timer Recording (OTR) VCR button Numeric buttons CH b/5 buttons Direction buttons REC/OTR buttons CHANNEL OTR is simple and convenient way to make a timed recording without programming to the Timer. When the OTR is completed,the DVD/VCR automatically enters the STOP mode. PREPARATION < Turn on the TV and DVD/VCR. < Tune the TV to the channel that receives the DVD/VCR signal. < Set the DVD/VCR to the VCR mode by pressing the VCR button when the VCR indicutor is not on the front panel display.
Normal Timer Programming 1 FM/AM V C R VCR button The step 3~10 With the NORMAL TIMER RECORDING feature, you can set the DVD/VCR so that it automatically comes on and records programs whenever you like without your being around! You can record a program one time only, or you can automatically record a show every weekday or every week at the same time. You can preset as many as 8 timed recordings at once. PREPARATION MENU button P A R T Direction buttons 1. Turn on the TV and set it to CH 3 or 4.
Normal Timer Programming 2 1 OPERATION VCR MENU CLOCK SET TIMER RECORDINGS CH SET INITIAL SET LANGUAGE MOVE: SELECT: 1 MENU MODE < Press the MENU button on the remote control. < VCR MENU screen appears. EXIT: 2 PROGRAMMING MODE 2 DATE 1 2 3 4 5 6 7 8 CH START : : : : : : : : / / / / / / / / SELECT: 1-8 3 END : : : : : : : : EXIT: PROGRAM 1 DATE < To enter the PROGRAMMING mode in the MENU screen, select the 'TIMER RECORDINGS'menu by 5 buttons. Then press the t button.
Normal Timer Programming 3 9 PROGRAM 1 DATE CH START 02 / 10 <2003> 07 AM09:30 < SP END AM11:30 TAPE SPEED SP TYPE ONE TIME 1 SLP 2 AUTO 3 > CLEAR: REVISE: EXIT: 10 V C R P A R T PROGRAM 1 DATE CH START 02 / 10 07 AM09:30 <2003> ONE TIME WEEKLY 3 END AM11:30 TAPE SPEED SP TYPE ONE TIME 1 WEEKDAY 2 CLEAR: REVISE: 11 1 2 3 4 5 6 7 8 DATE 02 / 10 / / / / / / / EXIT: CH 07 SELECT: 1-8 START AM09:30 : : : : : : : END AM11:30 : : : : : : : EXIT: 13 (Remote control) (Front panel d
Normal Timer Programming 4 19:00 20:00 21:00 22:00 PROGRAM 1 PROGRAMMING PROGRAM 2 V C R PROGRAM 3 RECORDING PROGRAM 1 P A R T PROGRAM 2 PROGRAM 3 - NOT RECORDED WHEN RECORD TIME OVERLAPS When you have set up several timed recordings, it may occur that some of their times overlap. For example, this can happen if you are set up to record shows on a daily or weekly basis, and a special show comes on that you try to record during the same time slot. AT THIS TIME .....
Checking and Cancelling Timer Recording TO CHECK TIMER PROGRAMS Example: To check PROGRAM 1 which has been already preset. A Programmed Example VCR button FM/AM V C R P A R T NUMERIC buttons CLEAR button TV/VCR < Press the MENU button and select the TIMER RECORDINGS menu. Then REC PROGRAMMING screen will appear. < Select the PROGRAM No.1 in the programming mode. B Unprogrammed Example When you select the unprogrammed PROGRAM No. in the programming mode, no content will appear.
VISS (VHS Index Search System) 1 The VHS index search function gives you automatic access to locations where index marks were recorded on the tape. It can perform index searching and skip searching when using the recorded tape containing index marks. The index marks are automatically recorded on the tape at the start time of normal recording and timer recording. FM/AM TV/VCR INDEX MARKING "INDEX MARK"indicator will be displayed on the screen for three seconds.
VISS (VHS Index Search System) 2 INDEX SKIP INDEX function also permits skipping to locate a particular section. By using the numeric buttons, enter the index number of the program you would like to watch. The VCR deck will then locate the desired program automatically. WATCHING BASKETBALL GAME NOW V C R P A R T Basketball Game News -2 SERCHING FOR INDEX MARKS . . .
CHANNEL Closed Captions WHAT IS CLOSED CAPTIONING? This DVD/VCR has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. OPERATION Press the CAPTION button to cycle between caption 1, caption 2,Text 1, and Text 2. Closed Captioning will display text on the screen for the hearing impaired viewers. Closed Caption Modes you can Choose 1.
AV 1 INPUT TUNING FUNCTION SURROUND REC COPY CHANNEL Copying from DVD to VHS 2 3 4 AV 1 INPUT TUNING FUNCTION SURROUND REC 6 HANNEL COPY CHANNEL 5 7 OPERATION H OPERATION 1 Insert a blank tape into the VCR deck. Make sure the record safety tab is attached to the tape. 1 V C R 2 Select DVD Mode P A R T HANNEL Press the DVD button on the remote control. 2 3 INSERT THE DISC 1). Press the OPEN/CLOSE button on the front of DVD/VCR. 2).
Y EC MTS Broadcast / TV stereo system CHANNEL A While watching TV, press the SOUND button on the remote. The current tuner audio status will be displayed on the screen. B Press the SOUND button repeatedly to select from the AV 1 INPUT TUNING FUNCTION SURROUND REC COPY following options: CHANNEL < stereo - Two - channel MTS stereo sound split into left and right channels. When a show is not broadcast in stereo, the sound reverts to mono.
Glossary Bit rate Value indicating the amount of video data compressed in a DVD per second. The unit is Mbps (mega bit per second). 1 Mbps indicates that the data per second is 1,000,000 bits. The higher the bit rate is, the larger the amount of data. However, this does not always mean that you can get higher quality pictures. Chapter Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters.
Programming of remote Using the TV,CABLE and SAT Buttons on the Remote Control Your Unit remote control will work with ANAM televisions and compatible brands. To determine whether your TV,CABLE and SAT arecompatible, follow the instructions below. 1 Switch yourTV or CABLE or SAT on. 2 Look up the brand and corresponding code number in the code list following pages. 3 Point the remote control towards the television.
Programming of remote TV Brand List Brand DIXI DRYNATRON DUAL DUAL-TEC DUMONT ELBE ELBIT ELCIT ELMAN ELTA EMERSON ERRES EUROPHON FERGUSON FIDELITY FINLUX FISHER FORGESTONE FORMENTI FORTRESS FRABA FRONTECH FUJITSU FUNAI GBC GEC GELOSO GOLDSTAR GOODMANS GORENJE GREATZ GRANADA GRUNDIG HANSEATIC HANTAREX HEMMERMANN HIFIVOX 74 CODE No.
Programming of remote TV Brand List Brand MITSUBISHI MIVAR MULTITECH MURPHY MAONIS NATIONAL NEC NECKERMANN NEI NIKKAI NOBLEX NOBLIKO NOGAMATIC NOKIA NORDMENDE OCEANIC ONCEAS OPTONICA ORION OSAKI OSIO OSUME OTTO VERSAND P.T ACTTRON PAEL PANASONIC PATHE CINEMA PERDIO PHILCO PHILIPS PHOENIX PHONOLA PIONEER PRANDONI-PRINCE PREMIER PRINCE PROTECH CODE No.
Programming of remote TV Brand List Brand SIERA CODE No.
Programming of remote CABLE Brand List Brand ABC CODE No.
Programming of remote SAT Brand List Brand ALBA AMSTRAD ARCON ARISTONA ASTRA BLAUPUNKT BUSH CH.MASTER CITY COM DDC DYNASAT ECHOSTAR EMME ESSE FAIT FERGUSON FINLUX FRACARRO FTE GOLDSTAR GRAETZ GROTHUSEN GRUNDIG HINARI HIRSCHMANN HITACHI INGELEN ITT ITT-NOKIA JERROLD KATHREIN KOSMOS KRIESLER LENCO LUXOR MAGAI MARANTZ MASPRO MATSUSHITA METZ MINERVA MULTISTAR MURATO NEC NEIRU NOKIA NORSAT PACE 78 CODE No.
Troubleshooting In case you experience any problem with this unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your dealer or a WELTON service center. No power e Check the connection to the AC wall outlet. Make sure the outlet is not switched by a lamp switch by plugging in another electrical device to see if the outlet is “live”. Playback does not start e Reload the disc with the label side UP. e Clean the disc.
Specifications DVD Specifications DVD Player Pickup ....... Semiconductor laser, Wavelength 650 nm Signal system ........................................................... NTSC Video signal horizontal resolution More than 480 lines (DVD) Video signal-to-noise ratio...... More than 55 dB (DVD) Audio frequency response (at 2 CH stereo mode) 20 Hz ~ 20 kHz (+1/-3 dB) Audio signal-to-noise ratio................. More than 80 dB Total harmonic distortion..................... Less than 0.
MEMO 81
MEMO 82
MEMO 83
WELTON SOUND SYSTEMS, U.S.A. 11625 Columbia Center Drive Suite 100 Dallas, Texas 75229 (972) 243-5602 FAX: (972) 243-5958 weltonusa.
