User Guide

25
D
V
D
P
A
R
T
DVD Settings 3
TV System
You may need to change the color system to match
your TV. Most TVs in the United Sates and Canada use
the NTSC color system. If your television should
happen to use PAL or MULTI, you need to change this
setting.
MULTI :
Select MULTI when a MULTI TV is connected.
PAL :
Select PAL when a PAL TV is connected.
NTSC:
Select NTSC When a NTSC TV is connected.
Notes
When your TV system isn't PAL, don't select "PAL".
In case you select "PAL" by mistake. press SETUP and
GUI button one or two times to select MULTI or NTSC.
Video output
The video signal will always be available through
the composite video jacks and cable .
Additionally, better video quality is selectable
through the video output settings when selecting
the S-Video jacks and cable , or the Y P
B/CB
PR/CR jacks and cable .
S-VIDEO
Y : Intensity (Luminance)
C : Color (Chrominance)
R, G, B (Y, Pb, Pr)
< Progressive scan (DVD)
Progressive scan video provides the highest quality
pictures with less flickering.
If you are using the component jacks, but are
connecting the DVD/VCR to a standard television,
set progressive scan to off.
If you are using the component jacks for connection
to a TV or monitor that is compatible with a progressive
scan signal, set progressive scan to on.
Notes
When your TV or Monitor is compatible with
progressive scan, select "progressive scan" by
pressing SETUP and ZOOM button. If your TV or
Monitor isn't compatible with progressive scan no
picture will be shown on the monitor. In case you
select "Progressive scan" by mistake, press SETUP and
ZOOM button one or two times to select S-VIDEO or Y,
P
b, Pr
C
B
A
F
E
OFF
NTSC
S-Video
Video Output
DVD SETUP
Sub - title
TV Type
TV System
4:3/PS
C
A
B
DVD