User Guide

45
D
V
D
P
A
R
T
Tuner
Select TUNER by pressing the FUNCTION button
repeatedly (or press the FM/AM button of the
remote control unit).
Make sure the antenna(s) have been connected (see
page 17).
Select AM or FM by pressing the FM/AM button
repeatedly.
If "PRESET" indicator is lit, press the TUNING MODE
button to select the manual tuning mode.
The "PRESET" indicator disappears from the display.
This button is used to change the tuning mode.
Select the station you want to listen to (auto
selection).
Hold down the TUNING button for 0.5 to 2 seconds.
When a station is tuned in, the tuning process will
stop automatically.
If you want to stop the tuning process, press the
TUNING/PRESET button.
Selecting stations which cannot be tuned
automatically (manual selection)
When the TUNING/PRESET button is pressed
momentarily (0.5 second or less), the frequency
changes by a fixed step.
FM : 100 kHz steps
AM : 10 kHz steps
Press the TUNING button repeatedly until the station
you want to listen to is found.
< "ST" is displayed when a stereo broadcast is tuned in.
< "Tuned" is displayed when a broadcast is correctly
tuned in.
FM MODE Button
Pressing this button alternates between Stereo mode
and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and
the "ST" indicator lights in the display.
Mono
To compensate for weak FM stereo reception,
select this mode.
4
3
2
1
3
2
14
FM/AM
3
FUNCTION
TUNING
1
FUNCTION
TUNING
FUNCTION
TUNING
FUNCTION
TUNING
FUNCTION
TUNING
FUNCTION
TUNING
FUNCTION
TUNING
2
3
4